Good day everyone
when i try enable ADDITIONAL DOMAIN CONTROLLER from ControlPanel it give me "Setting domain controller failed."
I checked this prerequisites i found surfing:
- In Domain Security from ControlPanel is Wizardly configured with AD Authentication (domain members) and is Joined to a local Domain (Domain users can actually connect to Qnap with their domain credentials)
- Actual Domain Controller is Windows 2019 Server (192.168.0.212), configured as DNS and DHCP server (in DHCP server option DNS1:192.168.0.212 , DNS2:none)
- From Server, in Powershell, "Get-ADDomain | fl Name,DomainMode" show me Windows2008R2Domain , so level of domain should be correct
- From ControlPanel, in Network & Virtual Switch homepage i see the Primary DNS server as 192.168.0.212 and Secondary DNS server none
Someone can help me about this problem?
Setting domain controller failed.
-
- New here
- Posts: 3
- Joined: Mon Jan 11, 2021 11:53 pm
-
- First post
- Posts: 1
- Joined: Fri May 27, 2022 9:02 pm
Re: Setting domain controller failed.
Were you able to get this working? I'm having the same issue connecting to a 2019 domain controller.