Domain Server
-
- Been there, done that
- Posts: 711
- Joined: Sat Oct 13, 2007 5:26 pm
- Location: Germany
Re: Domain Server
Yes,
i solved the main and other little issues.
I will write a topic in BETA-QPKG and upload the QPKG there.
Do you use the new firmware V3.7.0 and in this case the new home folders ?
That would be interesting, if you find some issues.
i solved the main and other little issues.
I will write a topic in BETA-QPKG and upload the QPKG there.
Do you use the new firmware V3.7.0 and in this case the new home folders ?
That would be interesting, if you find some issues.
_________________
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
-
- Easy as a breeze
- Posts: 440
- Joined: Thu Apr 23, 2009 1:51 am
Re: Domain Server
I am using the new fw 3.7.0, i am not sure about the home folders, how can i see that.
Would you try the howto in your topic, i would like to test if it works.
thanks in advance.
ps. good luck tomorrow....
Would you try the howto in your topic, i would like to test if it works.
thanks in advance.
ps. good luck tomorrow....
Qnap TS-453D
-
- Been there, done that
- Posts: 711
- Joined: Sat Oct 13, 2007 5:26 pm
- Location: Germany
Re: Domain Server
Thank you, also for your teambramschats wrote:ps. good luck tomorrow....
I uploaded the QPKG here http://forum.qnap.com/viewtopic.php?f=1 ... 00#p270800
You can activate the home folders under "Access right management" -> "users"
You do not have the required permissions to view the files attached to this post.
_________________
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
-
- Experience counts
- Posts: 1006
- Joined: Mon Nov 16, 2009 11:02 am
Re: Domain Server
I don't see any qpkg link there. Did you remove it?Eraser-EMC2- wrote:I uploaded the QPKG here http://forum.qnap.com/viewtopic.php?f=1 ... 00#p270800
SS-439, Ubuntu Server 12.04.3 LTS, EXT4, RAID10, 4xHitachi 5K1000
TS-112, 4.1.x Beta, EXT4, 1xHitachi 7K1000
TS-112, 4.1.x Beta, EXT4, 1xHitachi 7K1000
-
- Been there, done that
- Posts: 711
- Joined: Sat Oct 13, 2007 5:26 pm
- Location: Germany
Re: Domain Server
Yes, as you can see it on the page.
The version had a issue in the uninstall routine which delete the whole data on the NAS.
So i had to remove it.
At this time i cant say when i will upload the next version because i dont want to purge the data of other people.
The version had a issue in the uninstall routine which delete the whole data on the NAS.
So i had to remove it.
At this time i cant say when i will upload the next version because i dont want to purge the data of other people.
_________________
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
-
- Experience counts
- Posts: 1006
- Joined: Mon Nov 16, 2009 11:02 am
Re: Domain Server
Thanks, I see that now. Hopefully you can get to the bottom of the issue! Will be happy to test when you're ready.
SS-439, Ubuntu Server 12.04.3 LTS, EXT4, RAID10, 4xHitachi 5K1000
TS-112, 4.1.x Beta, EXT4, 1xHitachi 7K1000
TS-112, 4.1.x Beta, EXT4, 1xHitachi 7K1000
-
- New here
- Posts: 3
- Joined: Mon Sep 19, 2011 11:37 pm
Re: Domain Server
Basic:
I use TS 212 as an domaincontroller (PDC Win NT 4.0 like) with the qpkg from Eraser-EMC2-. in version 3.6.1 it was possible to join a domain with WinXP, in the version 3.7.3 ist was not possible. On the WinXP (plain new system with all patches) the system says an rpc error or the netapi32.dll crash.
With wireshark i see that the response diffent is
Is there any soloution or hint ?
edit:
.15 is the WinXP
.10 is the NAS with the PDC
edit2:
same in version 3.7.1, same response like 3.7.3, same error, not working correctly
Edit3:
3.6.1 without patch have the same trouble, with Patch it Works correctly.
I use TS 212 as an domaincontroller (PDC Win NT 4.0 like) with the qpkg from Eraser-EMC2-. in version 3.6.1 it was possible to join a domain with WinXP, in the version 3.7.3 ist was not possible. On the WinXP (plain new system with all patches) the system says an rpc error or the netapi32.dll crash.
With wireshark i see that the response diffent is
3.6.1 wrote:"327","40.504189000","192.168.1.15","192.168.1.10","RPC_NETLOGON","196","NetrEnumerateTrustedDomains request"
"328","40.506354000","192.168.1.10","192.168.1.15","RPC_NETLOGON","158","NetrEnumerateTrustedDomains response"
It looks for me like an internal problem in smbd. The version of smbd reports the same -> 3.5.2 but the date and filesize are diffent. From 3.6.1 is 9263904 bytes 11.may 13:59 and the version from 3.7.3 is 9269120 bytes 31.jul 23:393.7.3 wrote:"167","2.293849000","192.168.1.15","192.168.1.10","RPC_NETLOGON","196","NetrEnumerateTrustedDomains request"
"168","2.295641000","192.168.1.10","192.168.1.15","RPC_NETLOGON","150","NetrEnumerateTrustedDomains response, Unknown error 0x0000001f"
Is there any soloution or hint ?
edit:
.15 is the WinXP
.10 is the NAS with the PDC
edit2:
same in version 3.7.1, same response like 3.7.3, same error, not working correctly
Edit3:
3.6.1 without patch have the same trouble, with Patch it Works correctly.
-
- New here
- Posts: 5
- Joined: Wed Apr 17, 2013 6:32 pm
Re: Domain Server
I hear that the new SAMBA 4 can serve as a real Active Directory domain controller, configurable by official Microsoft tools. Is this true? Maybe QNAP can release official firmware.
-
- New here
- Posts: 3
- Joined: Mon Sep 19, 2011 11:37 pm
Re: Domain Server
I have make some installs under Debian with samba 4, i think this is far, far away. Whats the goal for QNAP ? Nothing, only a lot of work. But this is not the right thread for a discussion about samba 4.
I have spend a lot of time to find out, samba 3 is working for the purposes of qnap only, but there is no focus or support for the PDC function. The QNAP themselves can work as a member of a domain, this is normally enough for the mainstream.
I have spend a lot of time to find out, samba 3 is working for the purposes of qnap only, but there is no focus or support for the PDC function. The QNAP themselves can work as a member of a domain, this is normally enough for the mainstream.
- storageman
- Ask me anything
- Posts: 5506
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Domain Server
Exactly, why would you want a Qnap as PDC? More to go wrong. Leave domain control to Microsoft.af0815 wrote: I have spend a lot of time to find out, samba 3 is working for the purposes of qnap only, but there is no focus or support for the PDC function. The QNAP themselves can work as a member of a domain, this is normally enough for the mainstream.
-
- Been there, done that
- Posts: 711
- Joined: Sat Oct 13, 2007 5:26 pm
- Location: Germany
Re: Domain Server
You are right for for businessstorageman wrote: Leave domain control to Microsoft.
but for the home use is a Microsoft-Server oversized and to heavy in costs.
In this case is a PDC on a QNAP-NAS the best and cheapest solution.
Same as on the Microsoft-Server without experience.storageman wrote: More to go wrong.
In both cases you have to know how it works.
_________________
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
- storageman
- Ask me anything
- Posts: 5506
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Domain Server
Most home routers have enough DNS control options to keep 99% of people happy, still don't see the need (I mean how many IP addresses do people have at home) - unless I'm living in the past.Eraser-EMC2- wrote:You are right for for businessstorageman wrote: Leave domain control to Microsoft.
but for the home use is a Microsoft-Server oversized and to heavy in costs.
In this case is a PDC on a QNAP-NAS the best and cheapest solution.
Same as on the Microsoft-Server without experience.storageman wrote: More to go wrong.
In both cases you have to know how it works.
-
- Been there, done that
- Posts: 711
- Joined: Sat Oct 13, 2007 5:26 pm
- Location: Germany
Re: Domain Server
DNS and PDC are 2 different server types.storageman wrote:Most home routers have enough DNS control options to keep 99% of people happy,
In case of DNS it is correct
but PDC is a user database server (based on the Windows NT 4.0 Server , not AD Domain Server) to authenticate the user on Windows clients.
As i see you misunderstood the headline of this topic.
_________________
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
Windows 7 32/64bit, German
TS-439 , 1x 512GB SSD/1x 512GB Samsung ; SAMBA as NT4 PDC, DHCP/DNS-Server
TS-431+, 1x 1TB WD green, 2x 3TB WD red , 1x 2TB Samsung
TS-220 , 2x 2TB Samsung, for Backup
- storageman
- Ask me anything
- Posts: 5506
- Joined: Thu Sep 22, 2011 10:57 pm
Re: Domain Server
Yes, had a mental block there. Still, don't get the need for PDC via NAS.Eraser-EMC2- wrote:DNS and PDC are 2 different server types.storageman wrote:Most home routers have enough DNS control options to keep 99% of people happy,
In case of DNS it is correct
but PDC is a user database server (based on the Windows NT 4.0 Server , not AD Domain Server) to authenticate the user on Windows clients.
As i see you misunderstood the headline of this topic.
-
- Easy as a breeze
- Posts: 440
- Joined: Thu Apr 23, 2009 1:51 am
Re: Domain Server
Did someone test the PDC on the new SW version 4.0.1?
I want to update my version but want to be sure my PDC keeps working.
Thanks in advance.
I want to update my version but want to be sure my PDC keeps working.
Thanks in advance.
Qnap TS-453D