Several QMusic App issues\concerns when used with iPhone 5s:
1. In WIFI mode, playlist music play abruptly stops in middle of a song after a couple of songs are played. Music plays uninterrupted, without issue when in LTE/4G mode.
2. Play started in Wifi won't continue when phone switches to LTE. Last playing song will finish playing and then an error is displayed. Player needs to be restarted to play content again.
3. Now playing song title/artist does not display in a car or other accessory display consoles.
4. App goes to sleep mode even when syncing/plugged into a power source. Should have a setting to enable it to stay active displaying song info when plugged into power.
5. Comments/reviews/suggestions made in the App Store are not saved. Last reviews are from Jun 2013.
6. Terrible playlist song randomnizer. Keeps playing the same songs over again, even when repeat is disabled.
7. 600 song playlists are too small. Increase the number to 1000.
QMusic Issues
-
- Starting out
- Posts: 13
- Joined: Sat Dec 07, 2013 8:51 am
Re: QMusic Issues
Same issue using iPhone 6.
Any help would be nice.
Any help would be nice.
-
- New here
- Posts: 8
- Joined: Fri Mar 29, 2019 7:40 pm
Re: QMusic Issues
Same issue happening on iPhone 13.
Música freezes 1 or 2 times during play.
Any fixes?
Música freezes 1 or 2 times during play.
Any fixes?
- Don
- Guru
- Posts: 12289
- Joined: Thu Jan 03, 2008 4:56 am
- Location: Long Island, New York
Re: QMusic Issues
Locked due to necroposting. Different firmware, different Qmusic, different phone, different IOS from 7 1/2 years ago. Start a new topic and provide all details.
Use the forum search feature before posting.
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +
Use RAID and external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced, and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.
NAS: TVS-882BR | F/W: 5.0.1.2346 | 40GB | 2 x 1TB M.2 SATA RAID 1 (System/VMs) | 3 x 1TB M.2 NMVe QM2-4P-384A RAID 5 (cache) | 5 x 14TB Exos HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-h674 | F/W: 5.0.1.2376 | 16GB | 3 x 18TB RAID 5
Apps: DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS3, Entware, DLstation, VS, +