ts-659 hbs rsync issue

Discussion on remote replication.
Post Reply
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

by jhnmdahl » Fri Jan 22, 2021 10:13 pm

This appears to have solved my issues backing up a TVS-671 to a TVs-659 as well, using HBS or Hybrid Backup and Sync, receiving a "connection reset by peer" error. Wish QNAP would fix the firmware on device such as the 659, which is older but still perfectly capable, to work better.

It's especially annoying that backing up works with any third party solution, but QNAP's own software fails.

John
viewtopic.php?t=92724


i'm trying to backup one way rtrr from ts-877 to a ts-659 pro II. it worked twice for 2 jobs, but one job with a 1-3 tb size got reset around 15-20% and doesn't complete. Then i found this.

Any solution? i want to use HBS to run my backup jobs. If that is not possible, is there an alternative app that can do a rsync between these 2 nas :'
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

Re: ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

just to update, i have a ticket on this, qnap is looking into it. hopefully there is a solution. so if u have a similar issue to this, u can use my ticket as a referal to this case if u want

i'm not sure if this affects other models, but mine is a ts-659 pro II. I see in the forum that the 659 series gets mentioned having this issue with HBS triggering a "connection reset peer" during the rsync/rtrr which basically causes the rsync to cancel and restart.... (essentially you can never ever complete your rsync job because of this).

i think it's a matter that they need to resolve a bug in HBS, so hopefully the devs manage to come out with a fix :(
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

Re: ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

anyone know whether this commandline fix needs to be done from the source nas (ts-877), or on the destination nas (ts-659 pro II) ?
viewtopic.php?t=92724#p777747
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

Re: ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

helpdesk is assisting with the issue.

backup seems to work but there is some odd issue that hbs says there is some error, but when i checked the destination nas seems the data was backed up. i only checked the file size so i'm not 100% certain but looks alrite to me.

just worried about the error message pop up, any corruption? if not why is it displaying that message? still working things out.

good part is that now the backup can go all the way to 100% without the rsync job quiting half way due to peer reset issue.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

Re: ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

spoke too soon. i ran a 2nd job for a different share, and this time it did have that peer reset bug.

so maybe helpdesk did something for the 1st job that sort of worked, but did not do anything for this 2nd job i did. I donno what helpdesk was doing on their side to fix this.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
User avatar
Moogle Stiltzkin
Guru
Posts: 11448
Joined: Thu Dec 04, 2008 12:21 am
Location: Around the world....
Contact:

Re: ts-659 hbs rsync issue

Post by Moogle Stiltzkin »

just an update on this issue.

RTRR has the problem. Seems that RSYNC doesn't.

so i changed my job from using RTRR to using RSYNC and it completes.

this issue for using rtrr only occurs when trying to use HBS (latest) from ts-877 to an EOL HBS that can't be updated on a ts-659 Pro II. But i imagine this issue is happening to other models in a similar situation where u can't update to a newer HBS due to EOL status.

So if u are in a similar situation and RTRR job results in a peer connection reset, try to do RSYNC instead, it worked for me.

helpdesk was not helpful, i had to figure this out myself.
NAS
[Main Server] QNAP TS-877 (QTS) w. 4tb [ 3x HGST Deskstar NAS & 1x WD RED NAS ] EXT4 Raid5 & 2 x m.2 SATA Samsung 850 Evo raid1 +16gb ddr4 Crucial+ QWA-AC2600 wireless+QXP PCIE
[Backup] QNAP TS-653A (Truenas Core) w. 4x 2TB Samsung F3 (HD203WI) RaidZ1 ZFS + 8gb ddr3 Crucial
[^] QNAP TL-D400S 2x 4TB WD Red Nas (WD40EFRX) 2x 4TB Seagate Ironwolf, Raid5
[^] QNAP TS-509 Pro w. 4x 1TB WD RE3 (WD1002FBYS) EXT4 Raid5
[^] QNAP TS-253D (Truenas Scale)
[Mobile NAS] TBS-453DX w. 2x Crucial MX500 500gb EXT4 raid1

Network
Qotom Pfsense|100mbps FTTH | Win11, Ryzen 5600X Desktop (1x2tb Crucial P50 Plus M.2 SSD, 1x 8tb seagate Ironwolf,1x 4tb HGST Ultrastar 7K4000)


Resources
[Review] Moogle's QNAP experience
[Review] Moogle's TS-877 review
https://www.patreon.com/mooglestiltzkin
Post Reply

Return to “Remote Replication/ Disaster Recovery”