Hi,
I want to do a Full Wipe/Reset of my NAS, but first I would like to backup my NAS data to a network drive on a PC.
I though on DeltaCopy, but I cannot make NAS and Windows client see each other... Don't know why...
Is there any alternative I can use (and "how to" please) to make this backup?
Thanks in advance,
[Help]Data Replication NAS to PC (bit per bit)
- sentinelvdx
- Know my way around
- Posts: 115
- Joined: Sat Dec 19, 2015 5:28 am
- Location: Buenos Aires - Argentina
[Help]Data Replication NAS to PC (bit per bit)
NAS: TS-251+ 16GB DDR3L 1600mhz CAS11
Firm: QTS 5.0.0.xxxx
HDD's: 2x 4TB HGST Deskstar NAS - RAID0
Port Trunk: 802.3ad w/ Systimax CAT6a
Firm: QTS 5.0.0.xxxx
HDD's: 2x 4TB HGST Deskstar NAS - RAID0
Port Trunk: 802.3ad w/ Systimax CAT6a
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [Help]Data Replication NAS to PC (bit per bit)
pull the data from the qnap via the windows pc (with the drive) ?
- sentinelvdx
- Know my way around
- Posts: 115
- Joined: Sat Dec 19, 2015 5:28 am
- Location: Buenos Aires - Argentina
Re: [Help]Data Replication NAS to PC (bit per bit)
Yes... I was leaving that as last option, but I want a bit per bit transfer... with windows transfer sometimes removes metadata from files and I want to keep all files exactly as they are in the NAS.
Sent from SM-G935FD using Tapatalk
Sent from SM-G935FD using Tapatalk
NAS: TS-251+ 16GB DDR3L 1600mhz CAS11
Firm: QTS 5.0.0.xxxx
HDD's: 2x 4TB HGST Deskstar NAS - RAID0
Port Trunk: 802.3ad w/ Systimax CAT6a
Firm: QTS 5.0.0.xxxx
HDD's: 2x 4TB HGST Deskstar NAS - RAID0
Port Trunk: 802.3ad w/ Systimax CAT6a
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: [Help]Data Replication NAS to PC (bit per bit)
use Robocopy..leaves everything in