QSW-IM1200-8C LAG Throughput

Tell us your most wanted features from QNAP products.
Locked
josey_wells
First post
Posts: 1
Joined: Mon Feb 14, 2022 10:48 pm

QSW-IM1200-8C LAG Throughput

Post by josey_wells »

To whom it may concern:

I have several of the QSW-IM1200-8C 10G switches with LACP LAG's set up between pairs either for connecting switches together or as end points of dual redundant RF links. The issue that I see is that the throughput over the LAG seems to be only a single channel instead of both channels combined.

As an example the two RF links are a little over 500 Mbps each so I should see a throughput of close to 1 Gbps with both links up in the LACP lag but at most I see 500 Mbps. So there is no round robin or ping-ponging taking place between the members of the lag.

I would request a feature to increase the throughput over the LAG with some options such as fail over, round-robin etc to better utilize the LAG.

Sincerely,
Bryan Z
User avatar
OneCD
Guru
Posts: 12037
Joined: Sun Aug 21, 2016 10:48 am
Location: "... there, behind that sofa!"

Re: QSW-IM1200-8C LAG Throughput

Post by OneCD »

Hi Bryan and welcome to the forum. :)

This is a community forum. Please create a help-desk ticket and make your request to QNAP instead: https://service.qnap.com

viewtopic.php?f=24&t=161411

ImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImageImage
Locked

Return to “Features Wanted”