QTS - being able to "pair" the notification center of two Qnaps

Tell us your most wanted features from QNAP products.
Post Reply
TsuTey
Starting out
Posts: 10
Joined: Sun Feb 05, 2017 8:12 pm

QTS - being able to "pair" the notification center of two Qnaps

Post by TsuTey » Sat Aug 03, 2019 1:30 am

Hi Everyone.

I have multiple QNaps without internet-connection. They are in a separate network for security reasons. And, each NAS is even in an own network. There is a third network just for Sync-Reasons where the qnaps are inside with their second Interface. One of them can reach an SMTP-Server, the other one can't. It would be very cool to be able to "collect" the system notifications from a remote-device that I can see them just by logging in in one device in QTS. And therefore I could send them from one device without giving the other one too many permissions.

It would be great if that was possible. What is your opinion about that? I hope it is not already possible (or is it?)

User avatar
Don
Guru
Posts: 11962
Joined: Thu Jan 03, 2008 4:56 am
Location: Long Island, New York
Contact:

Re: QTS - being able to "pair" the notification center of two Qnaps

Post by Don » Sat Aug 03, 2019 3:03 am

You can have the system messages sent to a syslog server.
Read the Online Manuals and use the forum search feature before posting.

It is a recommended to use RAID and have external backups. RAID will protect you from disk failure, keep your system running, and data accessible while the disk is replaced and the RAID rebuilt. Backups will allow you to recover data that is lost or corrupted, or from system failure. One does not replace the other.

Submit bugs and feature requests to QNAP via their Helpdesk app.

NAS: TVS-882BR | F/W: 4.3.6.0895 | 40GB | 2 x M.2 SATA RAID 1 (System/VMs) | 4 x M.2 NMVe QM2-4P-384A RAID 5 (Cache) | 5 x 4TB HDD RAID 6 (Data) | 1 x Blu-ray
NAS: TVS-663 | F/W: 4.3.6.0993 | 16GB | 2 x M.2 NMVe QM2-2P RAID 1 (Cache) | 4 x 4TB RAID 5
Apps: Boinc, Squid, DNSMasq, PLEX, iDrive, QVPN, QLMS, MP3fs, HBS, Entware, DLstation, +others

User avatar
OneCD
Ask me anything
Posts: 6206
Joined: Sun Aug 21, 2016 10:48 am
Location: "... there, behind that sofa!"

Re: QTS - being able to "pair" the notification center of two Qnaps

Post by OneCD » Sat Aug 03, 2019 5:35 am

There's also Q'center. :)

production NAS: TS-569 Pro with Debian 9.9 'Stretch' (power on/off times are < 1 minute)
backup NAS: TS-559 Pro+ with QTS 4.2.6 #20190730

one.cd.only@gmail.com

Image Image Image Image

TsuTey
Starting out
Posts: 10
Joined: Sun Feb 05, 2017 8:12 pm

Re: QTS - being able to "pair" the notification center of two Qnaps

Post by TsuTey » Sun Aug 04, 2019 3:58 am

Don wrote:
Sat Aug 03, 2019 3:03 am
You can have the system messages sent to a syslog server.
Hi!

sorry that was my fault... this seems to be exactly what I need... sorry for that :-(

But one Question: I set up the Syslog-Server on the nas that can access the SMTP, and the Syslog-Client on the other NAS. And I even set up the client on the NAS itself, so now it collects the messages in one logfile. It also has an SMTP-Function - so it is just perfect for me. I set up the SMTP-Server in the notification Center (where I get referenced by A link on where to configure the SMTP in the Syslog-Server).

Now it just sends me the local Syslog-Messages as Mail... What am I doing wong? Where can I set up the Syslog Server to send all those Messages as Mail?

Post Reply

Return to “Features Wanted”