i need the most updated FULL firmware for ts-809u-rp

Tell us your most wanted features from QNAP products.
ptj_11
Starting out
Posts: 31
Joined: Sun Nov 23, 2008 5:26 am
Location: Denmark

Re: i need the most updated FULL firmware for ts-809u-rp

Post by ptj_11 » Sun Nov 20, 2011 2:05 am

continuation: now it writes: mDNSResponder: mDNSPlatformRawTime went backwards by 141584 ticks; setting correction factor to -104712366
Regards,
Ptj_11
TS-509 Pro

danielbaird
First post
Posts: 1
Joined: Sun Jan 01, 2012 5:46 pm

Re: i need the most updated FULL firmware for ts-809u-rp

Post by danielbaird » Tue Jan 03, 2012 1:39 pm

same problem here.

"quick.cgi[1561]: segfault at 9ddd1d64 ip b7708d08 sp bffdc1f0 error 6 in libuLinux_Storage.so.0.0[b76c6000+90000]"

single 250GB disk
hangs with the WebUI showing "20%"

followed these instructions
http://wiki.qnap.com/wiki/Firmware_Reco ... -based_NAS

ptj_11
Starting out
Posts: 31
Joined: Sun Nov 23, 2008 5:26 am
Location: Denmark

Re: i need the most updated FULL firmware for ts-809u-rp

Post by ptj_11 » Fri Jan 06, 2012 12:33 am

Hi Danielbaird.

Try this link:
http://wiki.qnap.com/w/index.php?title= ... very_guide
/ptj_11
Regards,
Ptj_11
TS-509 Pro

zepir2
New here
Posts: 3
Joined: Sat Feb 25, 2012 3:59 pm

Got same issue

Post by zepir2 » Sat Feb 25, 2012 5:53 pm

danielbaird wrote:same problem here.

"quick.cgi[1561]: segfault at 9ddd1d64 ip b7708d08 sp bffdc1f0 error 6 in libuLinux_Storage.so.0.0[b76c6000+90000]"

single 250GB disk
hangs with the WebUI showing "20%"

followed these instructions
http://wiki.qnap.com/wiki/Firmware_Reco ... -based_NAS


I had the same kind of issue for my TS-495Pro+ and found a solution. I posted it here. It may work for you as well, who knows. :roll:

opperbob
New here
Posts: 2
Joined: Tue Jun 25, 2013 5:26 pm

Re: i need the most updated FULL firmware for ts-809u-rp

Post by opperbob » Thu Mar 27, 2014 8:38 pm

Same problem here with a TS-809 Pro.

After this: http://wiki.qnap.com/w/index.php?title= ... very_guide
the recoverty works just like in the documends but i can not update the firmware to something new

I have tried alle firmware versions that are availeble

i tried to upgrade the firmware with Qfind

i tried to upgrade the firmware with dam small linux
http://wiki.qnap.com/w/index.php?title= ... very_guide

i tried to upgrade the firmware with the qnap console
http://wiki.qnap.com/wiki/Manually_Updating_Firmware

I even bought a new DOM 512 Mb to see if it was broken.

Please some one,.... can this be solved?

opperbob
New here
Posts: 2
Joined: Tue Jun 25, 2013 5:26 pm

Re: i need the most updated FULL firmware for ts-809u-rp

Post by opperbob » Thu Mar 27, 2014 8:38 pm

Same problem here with a TS-809 Pro.

After this: http://wiki.qnap.com/w/index.php?title= ... very_guide
the recoverty works just like in the documends but i can not update the firmware to something new

I have tried alle firmware versions that are availeble

i tried to upgrade the firmware with Qfind

i tried to upgrade the firmware with dam small linux
http://wiki.qnap.com/w/index.php?title= ... very_guide

i tried to upgrade the firmware with the qnap console
http://wiki.qnap.com/wiki/Manually_Updating_Firmware

I even bought a new DOM 512 Mb to see if it was broken.

Please some one,.... can this be solved?

!!!!!!!!!!!!!!!!!!!Solution--UPDATE--!!!!!!!!!!!!!!!!

-- step 1

Firmware recovery
http://wiki.qnap.com/w/index.php?title= ... very_guide

-- step 2
Update the correct firmware with qfinder without any HDD in the Qnap
Firmware can be found here
http://wiki.qnap.com/wiki/NAS_Firmware_ ... n_No_HDD(s)_Installed

-- step 3
insert a hard disk (i used a 80Gb deaget bara)
now you can do all 6 steps and after those steps you should be able to loggin to the webinterface and update to the latest version ( i did 4.0.5)

good luck all
Last edited by opperbob on Thu Mar 27, 2014 10:57 pm, edited 1 time in total.

User avatar
schumaku
Guru
Posts: 43673
Joined: Mon Jan 21, 2008 4:41 pm
Location: Kloten (Zurich), Switzerland -- Skype: schumaku
Contact:

Re: i need the most updated FULL firmware for ts-809u-rp

Post by schumaku » Thu Mar 27, 2014 9:28 pm

The recovery process is to have a bootable NAS again - not to install any current firmware.

Installing the firmware requires a configured system with storage in place.

If you have all that - please follow the process here http://wiki.qnap.com/wiki/Manually_Updating_Firmware - anything else is not verbose enough to see what might go wrong.

Post Reply

Return to “Features Wanted”