Hi All,
One of my TVS-471 NAS Boxes is reporting '[Volume DataVol1, Pool 1] The file system is not clean. It is suggested that you go to [Storage Manager] to run "Check File System".'.
I have managed to navigate to the 'Check File System' menu item by clicking on Storage Manager (1) > Storage Space (2) > Manage (3) > Actions (4) > Check File System (5) - as shown in the attached!
However I am unable to click on 'Check File System' due to it being greyed out.
I have rebooted the NAS multiple times with no benefit.
Any help with this issue will be appreciated.
Kind Regards,
Davo
'Check File System' menu greyed out on a TVS-471?
-
Mr Davo
- Starting out
- Posts: 38
- Joined: Wed Mar 22, 2017 6:49 am
'Check File System' menu greyed out on a TVS-471?
You do not have the required permissions to view the files attached to this post.
-
tombulum
- Know my way around
- Posts: 159
- Joined: Sat Jul 20, 2013 9:26 am
- Location: Australia
Re: 'Check File System' menu greyed out on a TVS-471?
Could it be that your file system is just too full?
Maybe purge some deleted files from the recycle bin and/or move some file off temporarily.
You'll have to address the issue of a full file system sooner, or later......
Maybe purge some deleted files from the recycle bin and/or move some file off temporarily.
You'll have to address the issue of a full file system sooner, or later......
Primary: QNAP TS-h1283XU-RP w/ 10 x Seagate EXOS 16TB in RAID-TP
FW QuTS Hero H5.0.0.1949 / 32 GB ECC RAM / Built-in 10 Gig network
Backup #1: Synology RS3617XS+ w/ 10 x Hitachi Ultrastar 10TB in RAID 6
FW DSM 7.0.1-42218 Update 3 1 / 8 GB ECC RAM / Built-in 10 Gig network
Backup #2: QNAP TVS-863 w/ 8 x Hitachi Deskstar 6TB in RAID 6
FW 5.0.0 / 8 GB RAM / LAN-10G2T-X550
Ternary: 2 x QNAP TS-879U-RP w/ 8 x WDC Red 4TB in RAID 6
FW 4.3.6 / 32 GB ECC RAM /
Ternary: QNAP TS-470 Pro w/ 4 x WDC Red 4TB in RAID 6
FW 4.3.6 / 16 GB ECC RAM /
FW QuTS Hero H5.0.0.1949 / 32 GB ECC RAM / Built-in 10 Gig network
Backup #1: Synology RS3617XS+ w/ 10 x Hitachi Ultrastar 10TB in RAID 6
FW DSM 7.0.1-42218 Update 3 1 / 8 GB ECC RAM / Built-in 10 Gig network
Backup #2: QNAP TVS-863 w/ 8 x Hitachi Deskstar 6TB in RAID 6
FW 5.0.0 / 8 GB RAM / LAN-10G2T-X550
Ternary: 2 x QNAP TS-879U-RP w/ 8 x WDC Red 4TB in RAID 6
FW 4.3.6 / 32 GB ECC RAM /
Ternary: QNAP TS-470 Pro w/ 4 x WDC Red 4TB in RAID 6
FW 4.3.6 / 16 GB ECC RAM /
-
MrVideo
- Experience counts
- Posts: 4742
- Joined: Fri May 03, 2013 2:26 pm
Re: 'Check File System' menu greyed out on a TVS-471?
There is no such thing as a full file system from keeping a file system check from working.
Open a QNAP helpdesk support ticket.
Open a QNAP helpdesk support ticket.
QTS MANUALS
Submit QNAP Support Ticket - QNAP Tutorials, FAQs, Downloads, Wiki - Product Support Status - Moogle's QNAP FAQ help V2
Asking a question, include the following (Thanks to Toxic17)
QNAP md_checker nasreport (release 20210309)
===============================
Model: TS-869L -- RAM: 3G -- FW: QTS 4.1.4 Build 20150522 (used for data storage)
WD60EFRX-68L0BN1(x1)/68MYMN1(x7) Red HDDs -- RAID6: 8x6TB -- Cold spare: 1x6TB
Entware
===============================
Model: TS-451A -- RAM: 2G -- FW: QTS 4.5.2 Build 20210202 (used as a video server)
WL3000GSA6472(x3) White label NAS HDDs -- RAID5: 3x3TB
Entware -- MyKodi 17.3 (default is Kodi 16)
===============================
My 2017 Total Solar Eclipse Photos | My 2019 N. Ireland Game of Thrones tour
Submit QNAP Support Ticket - QNAP Tutorials, FAQs, Downloads, Wiki - Product Support Status - Moogle's QNAP FAQ help V2
Asking a question, include the following (Thanks to Toxic17)
QNAP md_checker nasreport (release 20210309)
===============================
Model: TS-869L -- RAM: 3G -- FW: QTS 4.1.4 Build 20150522 (used for data storage)
WD60EFRX-68L0BN1(x1)/68MYMN1(x7) Red HDDs -- RAID6: 8x6TB -- Cold spare: 1x6TB
Entware
===============================
Model: TS-451A -- RAM: 2G -- FW: QTS 4.5.2 Build 20210202 (used as a video server)
WL3000GSA6472(x3) White label NAS HDDs -- RAID5: 3x3TB
Entware -- MyKodi 17.3 (default is Kodi 16)
===============================
My 2017 Total Solar Eclipse Photos | My 2019 N. Ireland Game of Thrones tour
-
Mr Davo
- Starting out
- Posts: 38
- Joined: Wed Mar 22, 2017 6:49 am
Re: 'Check File System' menu greyed out on a TVS-471?
Hi All,
Our Volume is 'thick' so therefore looks full; but it does in fact have plenty of free space.
I have noticed that a scan for bad blocks is actually already running on one of the hard drives on the NAS.
It seems logical that this would be the reason why the 'Check File System' scan is not available.
I will check again tomorrow when the bad block scan is finished.
Kind Regards,
Davo
Our Volume is 'thick' so therefore looks full; but it does in fact have plenty of free space.
I have noticed that a scan for bad blocks is actually already running on one of the hard drives on the NAS.
It seems logical that this would be the reason why the 'Check File System' scan is not available.
I will check again tomorrow when the bad block scan is finished.
Kind Regards,
Davo