Replacing faulty system disk

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
alphageek
New here
Posts: 3
Joined: Sat Jul 23, 2016 6:43 am

Replacing faulty system disk

Post by alphageek » Tue Dec 03, 2019 7:57 am

I noticed some bad SMART ratings for my system disk, where I also have some QNAP apps installed. The data files on the disk are regularly backed up to an external USB3 hard drive.

What's the recommended way to swap the system volume (no raid)? I did a backup of the QTS settings via the Control Panel. I also have a 8TB static data volume. Am I right to assume, this data volume settings are stored in the QTS settings, that I backed up?

So if I would do a fresh install of QTS on a new system disk and restore the QTS backup settings, the system should be in good shape again?

(this is a QNAP TS-451 runnings latest QTS / Firmware 4.4.1.1117)

User avatar
MrVideo
Experience counts
Posts: 4668
Joined: Fri May 03, 2013 2:26 pm

Re: Replacing faulty system disk

Post by MrVideo » Tue Dec 03, 2019 9:56 am

What is the hard drive configuration on your NAS? Numbers of disks, etc.
QTS 4.1.n/4.2.n/4.3.n MANUAL
Submit QNAP Support Ticket - QNAP Tutorials, FAQs, Downloads, Wiki - Product Support Status - Moogle's QNAP FAQ help V2
When you ask a question, please include the following
(Thanks to Toxic17 for the links)
QNAP md_checker nasreport (release 20180525)
===============================
Model: TS-869L -- RAM: 3G -- FW: QTS 4.1.4 Build 20150522 (used for data storage)
WD60EFRX-68L0BN1(x1)/68MYMN1(x7) Red HDDs -- RAID6: 8x6TB -- Cold spare: 1x6TB
Entware
===============================
Model: TS-451A -- RAM: 2G -- FW: QTS 4.2.3 Build 20170213 (used as a video server)
WL3000GSA6472(x3) White label NAS HDDs -- RAID5: 3x3TB
Entware -- MyKodi 17.3 (default is Kodi 16)
===============================
My 2017 Total Solar Eclipse Photos

Post Reply

Return to “System & Disk Volume Management”