No more reaction and all LEDs red

Questions about SNMP, Power, System, Logs, disk, & RAID.
knickebein
Starting out
Posts: 14
Joined: Sun Nov 08, 2015 10:07 pm

Re: No more reaction and all LEDs red

Post by knickebein »

Unfortunately I have no compatible sytem - only notebooks. And therefore I even have no alternative RAM.

I thought, I had upgraded the system with RAM - but maybe that was the predecessor-NAS... So I removed the original RAM.

But no status LED and no beep with or without RAM?
User avatar
dolbyman
Guru
Posts: 35005
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: No more reaction and all LEDs red

Post by dolbyman »

without ram there will be nothing..no
knickebein
Starting out
Posts: 14
Joined: Sun Nov 08, 2015 10:07 pm

Re: No more reaction and all LEDs red

Post by knickebein »

I now found out, that I have changed the factory RAM with 2x 4GB, but didn't keep the original modules... Grmpf!

Is it possible to use the NAS with only one Module (in which bank?)? Then I would have a chance that only one of the modules is defect an I can find the error without buying two new modules.
knickebein
Starting out
Posts: 14
Joined: Sun Nov 08, 2015 10:07 pm

Re: No more reaction and all LEDs red

Post by knickebein »

It lives!!!

All tries with combinations of the RAM modules failed. But after installing the resistor AND trying again with only one RAM module there was a beep again... Strange: after that I installed both RAM modules again and it worked, too. Scary!

But now the next problem: the NAS must be initialised again to factory settings. After that I wanted to use my backup of the settings. But that doesn't work because obviously I had another firmware version when I created the backup. And now the NAS declines to use it... How can I manage this when I don't know the firmware version of the backup?
knickebein
Starting out
Posts: 14
Joined: Sun Nov 08, 2015 10:07 pm

Re: No more reaction and all LEDs red

Post by knickebein »

I tried an older firmware version and it works. now the backup is restored. but I have to delete shared folders that doesn't exist anymore...

no matter - the task is solved mainly.

THANK YOU, dolbyman!
millopapi
First post
Posts: 1
Joined: Sat Sep 27, 2014 9:12 pm

Re: No more reaction and all LEDs red

Post by millopapi »

same happens to me on 16/8/2022
installed 100ohm resitor
now it is working .
TS-253 pro with two WD red HD , 2×2TB.
How many months/years of live expectation ?
BR Corrado
User avatar
dolbyman
Guru
Posts: 35005
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: No more reaction and all LEDs red

Post by dolbyman »

could be months, years .. unknown (and probably different on each unit)
FSC830
Experience counts
Posts: 2043
Joined: Thu Mar 03, 2016 1:11 am

Re: No more reaction and all LEDs red

Post by FSC830 »

millopapi wrote: Sat Aug 20, 2022 4:15 am same happens to me on 16/8/2022
installed 100ohm resitor
now it is working .
TS-253 pro with two WD red HD , 2×2TB.
How many months/years of live expectation ?
BR Corrado
Best time for creating an external backup, if not already available :wink: .

Regards
Post Reply

Return to “System & Disk Volume Management”