TS-453 System Booting

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
bazZti
First post
Posts: 1
Joined: Mon Oct 18, 2021 10:30 pm

TS-453 System Booting

Post by bazZti »

Hi

i have a TS-453 which stuck in System Booting.
There is no HDMI output.

Now i pulled all HDD and plugged them in another 4 Bay non Qnap System.
Therefor i took a Lubuntu USB Stick and all HDD plugged in.
All of them were found as SDB, SDC, SDD and SDE.

Is it possible to mount them with mdadm and copy Data?
I am searching for a manual to mount and copy data from the raid.

Thanks for Help.

Best
User avatar
dolbyman
Guru
Posts: 35013
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-453 System Booting

Post by dolbyman »

Check out this thread for some pointers

viewtopic.php?f=25&t=143408&start=15#p702846

I ave already replied in the German forum as well (you posted there too)
wongleslie
Starting out
Posts: 38
Joined: Thu Mar 25, 2021 8:30 am

Re: TS-453 System Booting

Post by wongleslie »

bazZti wrote: Mon Oct 18, 2021 10:46 pm Hi

i have a TS-453 which stuck in System Booting.
There is no HDMI output.

Now i pulled all HDD and plugged them in another 4 Bay non Qnap System.
Therefor i took a Lubuntu USB Stick and all HDD plugged in.
All of them were found as SDB, SDC, SDD and SDE.

Is it possible to mount them with mdadm and copy Data?
I am searching for a manual to mount and copy data from the raid.

Thanks for Help.

Best
You can refer to my solution.
viewtopic.php?f=191&t=163271
User avatar
dolbyman
Guru
Posts: 35013
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: TS-453 System Booting

Post by dolbyman »

op has a completely dead celeron unit ..not sure how much help your guide would be

could be the clock degradation that can be fixed with the resistor
Post Reply

Return to “System & Disk Volume Management”