Hi
i have a TS-453 which stuck in System Booting.
There is no HDMI output.
Now i pulled all HDD and plugged them in another 4 Bay non Qnap System.
Therefor i took a Lubuntu USB Stick and all HDD plugged in.
All of them were found as SDB, SDC, SDD and SDE.
Is it possible to mount them with mdadm and copy Data?
I am searching for a manual to mount and copy data from the raid.
Thanks for Help.
Best
TS-453 System Booting
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-453 System Booting
Check out this thread for some pointers
viewtopic.php?f=25&t=143408&start=15#p702846
I ave already replied in the German forum as well (you posted there too)
viewtopic.php?f=25&t=143408&start=15#p702846
I ave already replied in the German forum as well (you posted there too)
-
- Starting out
- Posts: 38
- Joined: Thu Mar 25, 2021 8:30 am
Re: TS-453 System Booting
You can refer to my solution.bazZti wrote: ↑Mon Oct 18, 2021 10:46 pm Hi
i have a TS-453 which stuck in System Booting.
There is no HDMI output.
Now i pulled all HDD and plugged them in another 4 Bay non Qnap System.
Therefor i took a Lubuntu USB Stick and all HDD plugged in.
All of them were found as SDB, SDC, SDD and SDE.
Is it possible to mount them with mdadm and copy Data?
I am searching for a manual to mount and copy data from the raid.
Thanks for Help.
Best
viewtopic.php?f=191&t=163271
- dolbyman
- Guru
- Posts: 35273
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: TS-453 System Booting
op has a completely dead celeron unit ..not sure how much help your guide would be
could be the clock degradation that can be fixed with the resistor
could be the clock degradation that can be fixed with the resistor