i have qnap tvs-871 raid 6 two volume first thin volume, HDD 7 broke i change it with another NEW seagate pro then the volume became unmounted i cant mount it back to make check file
could anyone help me
thanks
unmounted thin volume
-
- New here
- Posts: 4
- Joined: Sat May 14, 2022 7:49 am
unmounted thin volume
You do not have the required permissions to view the files attached to this post.
-
- New here
- Posts: 4
- Joined: Sat May 14, 2022 7:49 am
Re: unmounted thin volume
[~] # md_checker
Welcome to MD superblock checker (v2.0) - have a nice day~
Scanning system...
RAID metadata found!
UUID: 703f6aba:f3452752:b605beaf:c8ea161b
Level: raid6
Devices: 8
Name: md1
Chunk Size: 512K
md Version: 1.0
Creation Time: Sep 27 20:44:41 2021
Status: ONLINE (md1) [UUUUUUUU]
===============================================================================================
Enclosure | Port | Block Dev Name | # | Status | Last Update Time | Events | Array State
===============================================================================================
NAS_HOST 2 /dev/sdb3 0 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 1 /dev/sda3 1 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 3 /dev/sdc3 2 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 4 /dev/sdd3 3 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 5 /dev/sdg3 4 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 6 /dev/sdh3 5 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 7 /dev/sde3 6 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 8 /dev/sdf3 7 Active May 14 00:23:46 2022 128735 AAAAAAAA
===============================================================================================
[~] # /etc/init.d/init_lvm.sh
Changing old config name...
Reinitialing...
Detect disk(8, 80)...
dev_count ++ = 0Detect disk(8, 48)...
dev_count ++ = 1Detect disk(8, 16)...
dev_count ++ = 2Detect disk(8, 128)...
ignore non-root enclosure disk(8, 128).
Detect disk(8, 96)...
dev_count ++ = 3Detect disk(253, 0)...
ignore non-root enclosure disk(253, 0).
Detect disk(8, 64)...
dev_count ++ = 4Detect disk(8, 32)...
dev_count ++ = 5Detect disk(8, 0)...
dev_count ++ = 6Detect disk(8, 112)...
dev_count ++ = 7Detect disk(8, 80)...
Detect disk(8, 48)...
Detect disk(8, 16)...
Detect disk(8, 128)...
ignore non-root enclosure disk(8, 128).
Detect disk(8, 96)...
Detect disk(253, 0)...
ignore non-root enclosure disk(253, 0).
Detect disk(8, 64)...
Detect disk(8, 32)...
Detect disk(8, 0)...
Detect disk(8, 112)...
/bin/cat: /sys/bus/pci/devices/0000:00:1c.0/0000:01:00.0/subsystem_vendor: No such file or directory
/bin/cat: /sys/bus/pci/devices/0000:00:1c.0/0000:01:00.0/subsystem_vendor: No such file or directory
sys_startup_p2:got called count = -1
WARNING: duplicate PV p7daUTHPkYixFEqvne2zUJLGEO5mWDUP is being used from both devices /dev/drbd1 and /dev/md1
Found duplicate PV p7daUTHPkYixFEqvne2zUJLGEO5mWDUP: using /dev/drbd1 not /dev/md1
Using duplicate PV /dev/drbd1 from subsystem DRBD, ignoring /dev/md1
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
Done
Welcome to MD superblock checker (v2.0) - have a nice day~
Scanning system...
RAID metadata found!
UUID: 703f6aba:f3452752:b605beaf:c8ea161b
Level: raid6
Devices: 8
Name: md1
Chunk Size: 512K
md Version: 1.0
Creation Time: Sep 27 20:44:41 2021
Status: ONLINE (md1) [UUUUUUUU]
===============================================================================================
Enclosure | Port | Block Dev Name | # | Status | Last Update Time | Events | Array State
===============================================================================================
NAS_HOST 2 /dev/sdb3 0 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 1 /dev/sda3 1 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 3 /dev/sdc3 2 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 4 /dev/sdd3 3 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 5 /dev/sdg3 4 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 6 /dev/sdh3 5 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 7 /dev/sde3 6 Active May 14 00:23:46 2022 128735 AAAAAAAA
NAS_HOST 8 /dev/sdf3 7 Active May 14 00:23:46 2022 128735 AAAAAAAA
===============================================================================================
[~] # /etc/init.d/init_lvm.sh
Changing old config name...
Reinitialing...
Detect disk(8, 80)...
dev_count ++ = 0Detect disk(8, 48)...
dev_count ++ = 1Detect disk(8, 16)...
dev_count ++ = 2Detect disk(8, 128)...
ignore non-root enclosure disk(8, 128).
Detect disk(8, 96)...
dev_count ++ = 3Detect disk(253, 0)...
ignore non-root enclosure disk(253, 0).
Detect disk(8, 64)...
dev_count ++ = 4Detect disk(8, 32)...
dev_count ++ = 5Detect disk(8, 0)...
dev_count ++ = 6Detect disk(8, 112)...
dev_count ++ = 7Detect disk(8, 80)...
Detect disk(8, 48)...
Detect disk(8, 16)...
Detect disk(8, 128)...
ignore non-root enclosure disk(8, 128).
Detect disk(8, 96)...
Detect disk(253, 0)...
ignore non-root enclosure disk(253, 0).
Detect disk(8, 64)...
Detect disk(8, 32)...
Detect disk(8, 0)...
Detect disk(8, 112)...
/bin/cat: /sys/bus/pci/devices/0000:00:1c.0/0000:01:00.0/subsystem_vendor: No such file or directory
/bin/cat: /sys/bus/pci/devices/0000:00:1c.0/0000:01:00.0/subsystem_vendor: No such file or directory
sys_startup_p2:got called count = -1
WARNING: duplicate PV p7daUTHPkYixFEqvne2zUJLGEO5mWDUP is being used from both devices /dev/drbd1 and /dev/md1
Found duplicate PV p7daUTHPkYixFEqvne2zUJLGEO5mWDUP: using /dev/drbd1 not /dev/md1
Using duplicate PV /dev/drbd1 from subsystem DRBD, ignoring /dev/md1
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
LV Status NOT available
Done
-
- Know my way around
- Posts: 104
- Joined: Fri Apr 15, 2022 4:27 pm
Re: unmounted thin volume
Before losing a lot of time in searching for funny effects I would think about starting from scratch and restore all data from the backup.
-
- New here
- Posts: 4
- Joined: Sat May 14, 2022 7:49 am
Re: unmounted thin volume
i have backup but not for the last week any way i can mount the volume back to do the backup? then i can reset everything and start from scratch
-
- New here
- Posts: 4
- Joined: Sat May 14, 2022 7:49 am
Re: unmounted thin volume
help please anyone?