I just removed a faulty drive and replaced it with a brand new one. All 3 are WD Red Plus 3Tb. I let the system rebuild and when I looked this morning, there was a message saying the RAID was degraded and indicated one drive had failed. I switched to Storage and checked and no such disk failure exists.
There is something odd, though
I have 3 x 3Tb drives, each one showing 2.73Tb as capacity, yet the full RAID group shows only 5.44Tb in total. It is ONLY totalling 2 of the 3 drives.
https://ibb.co/JRXXLGJ
The system is RAID 5 with only 1 storage pool and no volumes created just at the moment.
Any thoughts as to why the total would only be showing the total of 2 drives rather than 3?
cheers
Only Total of 2 of 3 Drives in RAID 5
-
- Getting the hang of things
- Posts: 53
- Joined: Wed Nov 16, 2016 5:11 pm
-
- Know my way around
- Posts: 104
- Joined: Fri Apr 15, 2022 4:27 pm
Re: Only Total of 2 of 3 Drives in RAID 5
That seems to be correct for a RAID 5; the capacity of one drive is needed for the redundancy data.