We noticed recently the status LED on our QNAP TS-431XeU was solid orange/amber.
Does anyone know why this might be? According to the user guide, there isn't a status whereby the light is solid orange/amber.
The NAS itself is working perfectly ok - no issues whatsoever with any of the hardware or software.
I would be grateful to hear if anyone else has come across this just in case there is an issue we need to be aware of.
Thanks
Status LED is solid orange/amber - why?
-
- New here
- Posts: 5
- Joined: Tue Apr 13, 2021 10:18 pm
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Status LED is solid orange/amber - why?
Check:
Volume/Pool Thresholds
Smart Status of all disks
Temperature of the NAS or drives
Volume/Pool Thresholds
Smart Status of all disks
Temperature of the NAS or drives
-
- Experience counts
- Posts: 1791
- Joined: Tue May 29, 2018 3:02 am
- Location: Ottawa, Ontario, Canada
Re: Status LED is solid orange/amber - why?
It would be strange if there was no indication in the system logs or matching warnings in the Admin GUI console.
QNAP TS-563-16G 5x10TB Seagate Ironwolf HDD Raid-5 NIC: 2x1GB 1x10GbE
QNAP TS-231P-US 2x18TB Seagate Exos HDD Raid-1
[Deadbolt and General Ransomware Detection, Prevention, Recovery & MORE]
QNAP TS-231P-US 2x18TB Seagate Exos HDD Raid-1
[Deadbolt and General Ransomware Detection, Prevention, Recovery & MORE]
-
- New here
- Posts: 5
- Joined: Tue Apr 13, 2021 10:18 pm
Re: Status LED is solid orange/amber - why?
Haha. You will no doubt laugh with us on this one...
The status light WAS orange/amber last week - we went past the 80% disk space threshold but swiftly resolved that issue.
I am slightly colour blind and so not the best person to be checking status lights on hardware but there you go.
Anyway, my colleague was certain the light ws orange/amber as it had been when he last checked. I got him to check it this morning and he confirmed it was now GREEN which means all systems normal.
Many thanks for your replies and I hope this post helps out a colour-blind sys admin in the future!!
The status light WAS orange/amber last week - we went past the 80% disk space threshold but swiftly resolved that issue.
I am slightly colour blind and so not the best person to be checking status lights on hardware but there you go.
Anyway, my colleague was certain the light ws orange/amber as it had been when he last checked. I got him to check it this morning and he confirmed it was now GREEN which means all systems normal.
Many thanks for your replies and I hope this post helps out a colour-blind sys admin in the future!!
- dolbyman
- Guru
- Posts: 35024
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Status LED is solid orange/amber - why?
That's why a tripped threshold was on top of my list