Rebuilding stuck at 0%

[noodles_gb]

TS-673A
Firmware version h5.0.0.2120 Build 20220804

I have a 4 disk RAID group, I'm replacing the drives one by one, first one completed overnight so onto the second this morning. It's been like this for over half an hour.



Not sure if mdstat is relevant or not for QTS Hero.

Code: Select all

cat /proc/mdstat | grep speed
      [=======>.............]  recovery = 37.9% (12296064/32400896) finish=319.7min speed=1047K/sec

Is this just a UI bug?

[dolbyman]

mdstat will only show the system raid rebuilds..not zfs data

[noodles_gb]

GUI finally updated after about an hour, and is showing that it's rebuilding.