Hello!
So i got a :
TS-851
QTS 5.0.1.2248
Intel(R) Celeron(R) Cupu J1800
Memory 8 GB
And my disk one is full and that the one is all the Apps
So i can't access the whole qnap from windows! I can access it for about 10 minutes when i reboot and then i can only access it from the webinterface.
Warning 2023-01-29 15:00:00 --- --- localhost Multimedia Console Service [Multimedia Console] Stopped Multimedia Services. Remaining disk volume on /share/CACHEDEV1_DATA/ is less than 10 GB. Increase storage capacity or free up additional space.
I can't delete the files as the disk is readonly
I can't add to the storage pool. Because the button dont exist on my qnap! I got a new disk in i can add to it but..
https://www.qnap.com/en/how-to/faq/arti ... -raid-type
on mine i only see Action no other buttons, and under action i only got the choice from :
Remove
Resize Volume
Set Threshold
Set Caching Storage
Check File System
Rename Volume Alias
Format
Convert to Thin Volume
Any help.. Thanks
Qnap expand storage pool "button is not there"
-
- Starting out
- Posts: 15
- Joined: Tue Dec 01, 2015 4:18 pm
-
- Starting out
- Posts: 15
- Joined: Tue Dec 01, 2015 4:18 pm
Re: Qnap expand storage pool "button is not there"
Actually i did not think about deleting some apps! So i did that and now i got access to the qnap from windows again!.. But still how do i expand the disk as i can't find how to do that!
-
- First post
- Posts: 1
- Joined: Sat Sep 25, 2021 7:19 am
Re: Qnap expand storage pool "button is not there"
I have the same problem
Model: QNAP TS-453-BE
Firmware: QTS 5.0.1.2277
BIOS: QY47AR54
WD60EFZX-68B3FN0
Drives: 4 x WD60EFZX-68B3FN0
I replaced my 4x4Tb drives one at a time and each new drive was rebuilt.
The drives show as 4 x 6TB, but my storage pool is still the previous size of ~10TB
No Expand button on the action list.
Machine has been restarted, Firmware is up to date. Any suggestions?
Model: QNAP TS-453-BE
Firmware: QTS 5.0.1.2277
BIOS: QY47AR54
WD60EFZX-68B3FN0
Drives: 4 x WD60EFZX-68B3FN0
I replaced my 4x4Tb drives one at a time and each new drive was rebuilt.
The drives show as 4 x 6TB, but my storage pool is still the previous size of ~10TB
No Expand button on the action list.
Machine has been restarted, Firmware is up to date. Any suggestions?
-
- Easy as a breeze
- Posts: 400
- Joined: Mon Apr 29, 2019 3:21 pm
- Location: Paris, France
Re: Qnap expand storage pool "button is not there"
Not at all the same problem. Why not creating a new topic??
Anyway, I suppose you did not follow the correct procedure..
https://www.qnap.com/en/how-to/tutorial ... ty-upgrade
-
Anyway, I suppose you did not follow the correct procedure..
https://www.qnap.com/en/how-to/tutorial ... ty-upgrade
-