Page 1 of 1
TS509 Disc Size Limit
Posted: Tue May 01, 2018 4:27 am
by rabrah
I recently upgraded all of the disks to Seagate 6TB, however, the NAS is showing the total size (of 5 disks) of 7.3TB which is based on the previous disks capacities.
Is there any way to upgrade to make full use of the new disks or to at least get it up to the maximum? I tried to run the 'Expand capacity' but so the following message :
" You can expand the disk volume capacity to approximately 22356.12 GB
The system can only support expanding the volume size up to 16TB (and under)"
I have added some screen shots of the NAS set-up
Thanks in advance.
Roger
Re: TS509 Disc Size Limit
Posted: Tue May 01, 2018 4:34 am
by dolbyman
upgrading to a new NAS is the only way for a working RAID5 with 4*6TB disks (start from scratch so there is no legacy volume in the new NAS)
unless you want a RAID6 or 10 with 12TB storage
Re: TS509 Disc Size Limit
Posted: Tue May 01, 2018 6:16 pm
by P3R
- TS-509 Pro is a now very old legacy model so no storage pools are possible.
- All legacy models suffer from the 16 TB limit, which means that a volume can't be expanded or migrated to above 16 TB. Many legacy models however can use a larger than 16 TB volume if reinitialized and setup that way from scratch.
- Qnap doesn't support disks larger 2 TB in TS-509 Pro, which is also the reason there are no larger disks in the Qnap disk compatibility list. The reason for this is in hardware, as early TS-509 Pro have disk controllers with that limitation. Later TS-509 Pro may work with larger than 2 TB disks but it's still not supported!
Re: TS509 Disc Size Limit
Posted: Tue May 01, 2018 11:54 pm
by rabrah
dolbyman wrote:upgrading to a new NAS is the only way for a working RAID5 with 4*6TB disks (start from scratch so there is no legacy volume in the new NAS)
unless you want a RAID6 or 10 with 12TB storage
Hi,
Thank you - I will look at a new NAS
Re: TS509 Disc Size Limit
Posted: Tue May 01, 2018 11:56 pm
by rabrah
P3R wrote:- TS-509 Pro is a now very old legacy model so no storage pools are possible.
- All legacy models suffer from the 16 TB limit, which means that a volume can't be expanded or migrated to above 16 TB. Many legacy models however can use a larger than 16 TB volume if reinitialized and setup that way from scratch.
- Qnap doesn't support disks larger 2 TB in TS-509 Pro, which is also the reason there are no larger disks in the Qnap disk compatibility list. The reason for this is in hardware, as early TS-509 Pro have disk controllers with that limitation. Later TS-509 Pro may work with larger than 2 TB disks but it's still not supported!
Hi,
Thanks for your reply - looks like I will need to get a new NAS and migrate over. I am hoping that I can take one or two disks out of the original NAS without losing any data (I have RAID5 set-up) as long as I let it rebuild each time......is that correct?
Cheers,
Re: TS509 Disc Size Limit
Posted: Wed May 02, 2018 12:00 am
by dolbyman
rabrah wrote:I am hoping that I can take one or two disks out of the original NAS without losing any data (I have RAID5 set-up) as long as I let it rebuild each time......is that correct?
Cheers,
See my post .. if you do that you are stuck in legacy with the same 16TB limitation, you have to start from scratch
Re: TS509 Disc Size Limit
Posted: Wed Sep 18, 2019 3:16 am
by donnar
Mellow greetings all, How would you know if you have a late model ts-509? I guess I could just try a larger than 3tb disk, but is there a specific serial or design change?
Re: TS509 Disc Size Limit
Posted: Wed Sep 18, 2019 4:28 am
by P3R
donnar wrote: ↑Wed Sep 18, 2019 3:16 am
Mellow greetings all, How would you know if you have a late model ts-509?
I don't know any other way than to try it.