optimising ts-231p

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
adminsly
Starting out
Posts: 39
Joined: Sat Oct 25, 2014 11:14 am

optimising ts-231p

Post by adminsly » Fri Aug 23, 2019 7:26 pm

hi guys, i have a ts-231p and i use it as a file server and some user will have VPN access with openvpn.... my question is can i disable some apps or services to reduce the load ?

thanks for your advise

sylvain

dolbyman
Guru
Posts: 14696
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: optimising ts-231p

Post by dolbyman » Fri Aug 23, 2019 9:05 pm

not much room for improvement on that nas..but if you have installed apps..you can certainly disable them

otherwise disclose what apps you are talking about

adminsly
Starting out
Posts: 39
Joined: Sat Oct 25, 2014 11:14 am

Re: optimising ts-231p

Post by adminsly » Fri Aug 23, 2019 10:48 pm

i only install qvpn , my question was if i can disable or remove some default apps or services.

dolbyman
Guru
Posts: 14696
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: optimising ts-231p

Post by dolbyman » Fri Aug 23, 2019 11:05 pm

not much active by default ..check your app center

adminsly
Starting out
Posts: 39
Joined: Sat Oct 25, 2014 11:14 am

Re: optimising ts-231p

Post by adminsly » Fri Aug 30, 2019 5:59 am

if i connect my 2 ethernet will i get a better speed to access the NAS ? my switch is gigabyte.

thanks

User avatar
Toxic17
Ask me anything
Posts: 5197
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: optimising ts-231p

Post by Toxic17 » Fri Aug 30, 2019 6:08 am

you could port trunk the 2 Ports together yes. Balance-alb or balanced-tlb would increase overall throughput, but you will only get 1GB max speed from one IP sesssion. 2GB data throughput from multiple IP sessions.

an example is shown here using 2 x 10GB ports but the same can be done with 2 x 1GB ports. https://www.qnap.com/tr-tr/how-to/tutor ... -qnap-nas/

vpn traffic speed will be limited via your broadband/fibre upload/download speeds and the NAS's CPU resources. dont expect high end speeds.
Regards Simon

QTS 4.x User Guidex

QNAP Club Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-473-32GB QM2-2P QXG-10G1T 4.4.1.1064 • TVS-463-16GB 4.4.1.1064 QM2-2S10G1TB • TS-459 Pro 2GB 4.2.6 • TS-121 4.3.3.0998 • APC Back-UPS ES 700G •
QPKG's: TwonkyServer 8.51 • Apache73 v2441.7310 • QSonarr 3.0.3.644 • QNBZGet 21.0 • phpMyAdmin 4.9.0.1 • Qmono 5.20.1.19 • McAfee 3.0.1 • Lychee 3.2.16 • HBS 3.0.1908029 • LEgo v3.0.0
Network: VM Hub 3.0 <500/35> • UniFi USG Pro 4 • UniFi USW-16-150W • UniFi USW-8-60W • UniFi CloudKey Gen2+• UniFi G3-Flex • UAP AC Pro • UAP AC Lite • SLM2008 • Dell 7050 MFF •

adminsly
Starting out
Posts: 39
Joined: Sat Oct 25, 2014 11:14 am

Re: optimising ts-231p

Post by adminsly » Fri Aug 30, 2019 11:07 am

thanks simon

Post Reply

Return to “System & Disk Volume Management”