Page 1 of 1

optimising ts-231p

Posted: Fri Aug 23, 2019 7:26 pm
by adminsly
hi guys, i have a ts-231p and i use it as a file server and some user will have VPN access with openvpn.... my question is can i disable some apps or services to reduce the load ?

thanks for your advise

sylvain

Re: optimising ts-231p

Posted: Fri Aug 23, 2019 9:05 pm
by dolbyman
not much room for improvement on that nas..but if you have installed apps..you can certainly disable them

otherwise disclose what apps you are talking about

Re: optimising ts-231p

Posted: Fri Aug 23, 2019 10:48 pm
by adminsly
i only install qvpn , my question was if i can disable or remove some default apps or services.

Re: optimising ts-231p

Posted: Fri Aug 23, 2019 11:05 pm
by dolbyman
not much active by default ..check your app center

Re: optimising ts-231p

Posted: Fri Aug 30, 2019 5:59 am
by adminsly
if i connect my 2 ethernet will i get a better speed to access the NAS ? my switch is gigabyte.

thanks

Re: optimising ts-231p

Posted: Fri Aug 30, 2019 6:08 am
by Toxic17
you could port trunk the 2 Ports together yes. Balance-alb or balanced-tlb would increase overall throughput, but you will only get 1GB max speed from one IP sesssion. 2GB data throughput from multiple IP sessions.

an example is shown here using 2 x 10GB ports but the same can be done with 2 x 1GB ports. https://www.qnap.com/tr-tr/how-to/tutor ... -qnap-nas/

vpn traffic speed will be limited via your broadband/fibre upload/download speeds and the NAS's CPU resources. dont expect high end speeds.

Re: optimising ts-231p

Posted: Fri Aug 30, 2019 11:07 am
by adminsly
thanks simon