Qnap NVME Disk Access History I/O - issue

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
file-moon
New here
Posts: 2
Joined: Wed Aug 21, 2019 4:10 am

Qnap NVME Disk Access History I/O - issue

Post by file-moon » Mon Aug 26, 2019 6:57 pm

Hi,


I have Samsung NVME connected to Qnap extension card - after power cut disk status for NVME Samsung disk has ben changed to Disk Access History (I/O) - Error.

because of status - I'm unable to access data/wipe disk .....

I know we have two options to remove disk status:

1. take disk out from Qnap reformat on other computer insert again (not possible in my case)
2. run badblock scanner (Qnap asked that found I/O history error do you want to clean the error up if result is normal) - I'm selecting yes, scanning is finished after time no scan error is present and disk status is still in Error. I was able to call ssh command for scan disk and also no error. Disk is 100% ok - however Qnap is stubborn.


As far as I understand there must be config file with Disk Access History (I/O) flag, can anyone help me to find the file so I will be able to change status manually?

(ticket with qnap is logged but they not very fast with answering)


Regards Chris

Post Reply

Return to “System & Disk Volume Management”