Hi,
I have Samsung NVME connected to Qnap extension card - after power cut disk status for NVME Samsung disk has ben changed to Disk Access History (I/O) - Error.
because of status - I'm unable to access data/wipe disk .....
I know we have two options to remove disk status:
1. take disk out from Qnap reformat on other computer insert again (not possible in my case)
2. run badblock scanner (Qnap asked that found I/O history error do you want to clean the error up if result is normal) - I'm selecting yes, scanning is finished after time no scan error is present and disk status is still in Error. I was able to call ssh command for scan disk and also no error. Disk is 100% ok - however Qnap is stubborn.
As far as I understand there must be config file with Disk Access History (I/O) flag, can anyone help me to find the file so I will be able to change status manually?
(ticket with qnap is logged but they not very fast with answering)
Regards Chris
Qnap NVME Disk Access History I/O - issue
-
- New here
- Posts: 4
- Joined: Wed Aug 21, 2019 4:10 am
-
- New here
- Posts: 3
- Joined: Tue Jul 28, 2020 8:18 am
Re: Qnap NVME Disk Access History I/O - issue
Hi Chris,file-moon wrote: ↑Mon Aug 26, 2019 6:57 pm Hi,
I have Samsung NVME connected to Qnap extension card - after power cut disk status for NVME Samsung disk has ben changed to Disk Access History (I/O) - Error.
because of status - I'm unable to access data/wipe disk .....
I know we have two options to remove disk status:
1. take disk out from Qnap reformat on other computer insert again (not possible in my case)
2. run badblock scanner (Qnap asked that found I/O history error do you want to clean the error up if result is normal) - I'm selecting yes, scanning is finished after time no scan error is present and disk status is still in Error. I was able to call ssh command for scan disk and also no error. Disk is 100% ok - however Qnap is stubborn.
As far as I understand there must be config file with Disk Access History (I/O) flag, can anyone help me to find the file so I will be able to change status manually?
(ticket with qnap is logged but they not very fast with answering)
Regards Chris
Have same problem with my SSD and already due same tests you put where, but without success.
Have you any update from QNAP Support?
BR
Luis
-
- New here
- Posts: 5
- Joined: Thu Nov 08, 2012 2:09 am
Re: Qnap NVME Disk Access History I/O - issue
I have exactly the same problem, clean drive but it does not reset the error status.lfphvs wrote: ↑Fri Jul 09, 2021 6:51 amHi Chris,file-moon wrote: ↑Mon Aug 26, 2019 6:57 pm Hi,
I have Samsung NVME connected to Qnap extension card - after power cut disk status for NVME Samsung disk has ben changed to Disk Access History (I/O) - Error.
because of status - I'm unable to access data/wipe disk .....
I know we have two options to remove disk status:
1. take disk out from Qnap reformat on other computer insert again (not possible in my case)
2. run badblock scanner (Qnap asked that found I/O history error do you want to clean the error up if result is normal) - I'm selecting yes, scanning is finished after time no scan error is present and disk status is still in Error. I was able to call ssh command for scan disk and also no error. Disk is 100% ok - however Qnap is stubborn.
As far as I understand there must be config file with Disk Access History (I/O) flag, can anyone help me to find the file so I will be able to change status manually?
(ticket with qnap is logged but they not very fast with answering)
Regards Chris
Have same problem with my SSD and already due same tests you put where, but without success.
Have you any update from QNAP Support?
BR
Luis
Has any of you solved this yet?