QNAP NAS Community Forum

Microsoft’s Windows XP Home and Professional SP3 designed for client PCs reached end-of-life on April 8, 2014. The company then ceased to support its Windows Embedded for Point of Service SP3 and XP Embedded SP3 in 2016. Subsequently, Windows Embedded Standard 2009 reached EOL on January 8, 2019. Finally, it is time for Windows Embedded POSReady 2009 (released in late 2008, two years after Windows Vista) to go.

Even though Windows Embedded POSReady 2009 operating system will no longer be supported by Microsoft, many organizations and individuals will keep using it either to maintain compatibility with software or hardware applications they use (for example, manufacturing equipment made in the 1990s or the 2000s) or for other reasons. Therefore, it is safe to say that Windows XP will still be in limited use after whopping 17.5 years on the market. In fact, it should be pretty safe to use the OS on computers not connected to the Internet and not using USB drives (or other potentially insecure storage devices).

Without any doubts, Windows XP was a legend that in many ways helped to shape the PC market as we know it today and outlived at least one of its successors. Nonetheless, every legend comes to an end.

Also on the downswing, and in a major way, was the duo of Windows 8 and Windows 8.1. (The former is officially unsupported by Microsoft, yet approximately seven-tenths of one percent of all Windows PCs still run that OS.) Together, they shed 1.1 percentage points of share, the largest amount since December 2016 when Windows 8.1 was near the tail of its post-Windows 10-debut downturn. Now at just 4.8% of all PC operating system and 5.5% of those running Windows, the 8/8.1 twosome are slowly, very slowly - like the remnants of Windows XP - vanishing. Unlike most Windows editions, however, these will be nearly invisible by the time their support expires in January 2023.

When you ask a question, please include the following (Thanks to Toxic17 for the links)
QNAP md_checker nasreport (release 20180525)

Moogle Stiltzkin wrote: ↑Sun Sep 08, 2019 9:53 am I don't have a TR series, but from what i read, you can setup and manage it either

1. from the qnap app installed on windows (QNAP external raid manager)
2. or via qts

I saw this video that seems to mention some of this
https://www.youtube.com/watch?v=WWKbLYL2Cb4

MrVideo wrote: ↑Sun Sep 08, 2019 9:58 am WinXP only supports 2TB drive size, max. With the QNAP RAID controller software installed on the PeeCee, it might support a larger size. I have no idea. You'd have to look at what the software can do.

cuneiform wrote: ↑Sun Sep 08, 2019 8:35 pm well, gentlemen

these questions seem to be not so simple...

now, I have placed the 2 recommended Iron Wolf HDDs into the QNAP storage as told in the manual,
set them to RAID 1 mode, got the beep, and ... there is nothing to see on the screen of a modern DELL device with Win 10 installed... such as Dell Venue 11 Pro Tablet

I will attach some pics...




Here we can see 3 green lights, but none blue light;
a Kingstone stick 32 Gb attached to the DELL USB port instead of QNAP-TR-002 just to demonstrate the DELL Venue 11 Pro Tablet is OK.

There is no TR-002 to see.

Any ideas?!

Since it doesn't sounds like you did that step, that is why you don't see it. It doesn't have a drive letter yet to present.