thin to thick conversion

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
omen2010
New here
Posts: 5
Joined: Mon May 06, 2019 11:28 pm

thin to thick conversion

Post by omen2010 » Sun Sep 15, 2019 12:48 am

Hi,

I am converting 38TB volume to thick, initially, CPU usage was at 100%, after about 6-8 hrs it went down to 15% - 40%, at the same time conversion status, got stuck at 52.7% and it's been like that for over 12 hrs. Is the process finished, stuck or did it failed? Is there a command I can issue to check the conversion status via SSH?

Should I give it more time to finish, reboot or take any other action?
You do not have the required permissions to view the files attached to this post.

omen2010
New here
Posts: 5
Joined: Mon May 06, 2019 11:28 pm

Re: thin to thick conversion

Post by omen2010 » Sun Sep 15, 2019 10:16 pm

Process finished after about 3 days, the conversion failed. I am back to a thin volume.

dolbyman
Guru
Posts: 15201
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: thin to thick conversion

Post by dolbyman » Mon Sep 16, 2019 3:24 am

best to open a ticket with qnap

Post Reply

Return to “System & Disk Volume Management”