Hello.
I have TS-431 with firmware ver. 4.3.6.1620.
Today I did upgrade with bigger disks and wanted to create Thick disk in order to get option of Snapshots , but I only get static disk.
At the beginning I get window "Welcome to Storage Manager" with explanation of storage pool and volume Thick/Thin.
But not any option to create Storage Pool.....
TS-431 No option to create Storage Pool
-
ikifikif
- Starting out
- Posts: 32
- Joined: Mon Aug 22, 2016 4:46 pm
-
dolbyman
- Guru
- Posts: 35253
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
-
OneCD
- Guru
- Posts: 12146
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: TS-431 No option to create Storage Pool
Yep, found this in an old (2015) user manual regarding compatibility of storage pools and models (the TS-431 was released 2nd of October 2014):
https://docs.qnap.com/nas-outdated/4.2/ ... _pools.htm
https://docs.qnap.com/nas-outdated/4.2/ ... _pools.htm
QNAP wrote:Note:
- This feature is only applicable to the following NAS models: TS-269L, TS-269 Pro, TS-469 Pro, TS-469L, TS-469U-RP, TS-469U-SP, TS-470 Pro, TS-470, TS-569 Pro, TS-569L, TS-669 Pro, TS-669L, TS-670 Pro, TS-670, TS-869 Pro, TS-869L, TS-869U-RP, TS-870 Pro, TS-870, TS-870U-RP, TS-879 Pro, TS-879U-RP, TS-1079 Pro, TS-1269U-RP, TS-1270U-RP, TS-1279U-RP, TS-1679U-RP, TS-EC879U-RP, TS-EC1279U-RP, TS-EC1279U-SAS-RP, TS-EC1679U-RP, TS-EC1679U-SAS-RP, SS-EC1279U-SAS-RP, SS-EC1879U-SAS-RP and SS-EC2479U-SAS-RP, TS-EC880 Pro, TS-EC1080 Pro, TS-EC880U-RP, TS-EC1280U-RP, TS-EC1680U-RP, TS-EC2480U-RP, TVS-471, TVS-671, TVS-871, TVS-871U-RP, TVS-1271U-RP, TVS-463, TVS-663, TVS-863, TVS-863+.
