Hello everyone.
I'm having an issue with one of my HD
It's a WD RED WD30EFRX which was installed a few months ago, which should be working perfectly fine.
I got an I/O error in the disk health, so the data volume is degraded. I'm quite sure the HD isn't a problem, as I moved it to my desktop, where it didn't detect any problem and it runs fine.
I've been a full scan and format on the desktop PC.
I tried doing a bad block scan and try to delete the I/O error history, but now the NAS detects bad blocks, when no bad blocks were found while scanning on the desktop PC, and SMART information doesn't show any error.
Is there any way to reset/ clear the Disk Access History I/O??
I attach screenshots of the errors I'm facing.
Thanks for any suggestion
Clearing "Disk Access History I/O" error ?? - how is it done?
-
- Starting out
- Posts: 17
- Joined: Mon Sep 26, 2016 11:51 pm
Clearing "Disk Access History I/O" error ?? - how is it done?
You do not have the required permissions to view the files attached to this post.
QNAP TS-251 8GB RAM
2X 3TB WD RED WD30EFRX set as RAID 1
FW: QTS 4.5.1.1495
2X 3TB WD RED WD30EFRX set as RAID 1
FW: QTS 4.5.1.1495
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
clear the disk with dispart (clean) and try again
it could also be a busted port on your nas
it could also be a busted port on your nas
-
- Starting out
- Posts: 17
- Joined: Mon Sep 26, 2016 11:51 pm
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
Thank for the reply.
The port is fine as I tried replacing bays, and the port is fine now with another disk. I'm having the same error on the disk with the I/O problem also on the second bay.
do you mean using diskpart while connected to my desktop PC? What is the specific command I should use? is it like this one?
https://www.seagate.com/em/en/support/k ... -005929en/
Thank you
QNAP TS-251 8GB RAM
2X 3TB WD RED WD30EFRX set as RAID 1
FW: QTS 4.5.1.1495
2X 3TB WD RED WD30EFRX set as RAID 1
FW: QTS 4.5.1.1495
-
- Starting out
- Posts: 29
- Joined: Fri Aug 14, 2015 1:09 am
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
Yes, see my other post viewtopic.php?f=25&t=162576&p=799667#p799667.
In short, the information is stored in
Code: Select all
/mnt/HDA_ROOT/.conf
-
- New here
- Posts: 3
- Joined: Sun Sep 11, 2022 8:14 am
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
Cameo,
Great info, I am not finding /mnt/HDA_ROOT/.conf in my NAS files (TS-451D2). Any ideas?
Great info, I am not finding /mnt/HDA_ROOT/.conf in my NAS files (TS-451D2). Any ideas?
- dolbyman
- Guru
- Posts: 34903
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
it's hidden .. try to open/edit it anyways
e.g.
Do that as admin user and you should see content
e.g.
Code: Select all
vi /mnt/HDA_ROOT/.conf
-
- First post
- Posts: 1
- Joined: Mon Dec 11, 2023 4:51 pm
Re: Clearing "Disk Access History I/O" error ?? - how is it done?
execute this command in SSH:
sed -i '/pd_err_wwn_/d' /mnt/HDA_ROOT/.conf
if the error persists, repeat the command, do the bad block scan and choose to clear the previous io error.
sed -i '/pd_err_wwn_/d' /mnt/HDA_ROOT/.conf
if the error persists, repeat the command, do the bad block scan and choose to clear the previous io error.