Reset settings drive volume problem

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
tekmonq
New here
Posts: 7
Joined: Sat Jan 28, 2017 6:41 am

Reset settings drive volume problem

Post by tekmonq »

Performed a "reset settings" on my
TS-251+ QTS version 4.5.4.1787.
After rebooting, I setup the 500gb ssd as a new volume.

I attempted to "attach and recover" the volume on the 6TB drive through QTS which
produced an error: "no storage pools or volumes detected.
Screenshot included below.
gnome-shell-screenshot-AMPY90.png
screenshot of command attached below:
cat /proc/mdstat
gnome-shell-screenshot-H5W890.png
screenshot of command attatched below:
/etc/init.d/init_lvm.sh
gnome-shell-screenshot-DMAW90.png
Any suggestions are appreciated.

Data isn't mission critical but would be nice to know how to recover from problem

TIA
You do not have the required permissions to view the files attached to this post.
User avatar
dolbyman
Guru
Posts: 35028
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Reset settings drive volume problem

Post by dolbyman »

The old drive was probably the system drive .. now you have two system drives

Remove the SSD and start with only the 6TB drive to confirm.
tekmonq
New here
Posts: 7
Joined: Sat Jan 28, 2017 6:41 am

Re: Reset settings drive volume problem

Post by tekmonq »

Ok,
- Removed ssd and booted with just the hdd
- cat /proc/mdstat

Code: Select all

[~] # cat /proc/mdstat 
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] 
md322 : active raid1 sda5[0]
      7235136 blocks super 1.0 [2/1] [U_]
      bitmap: 1/1 pages [4KB], 65536KB chunk

md256 : active raid1 sda2[0]
      530112 blocks super 1.0 [2/1] [U_]
      bitmap: 1/1 pages [4KB], 65536KB chunk

md13 : active raid1 sda4[1]
      458880 blocks super 1.0 [64/1] [_U______________________________________________________________]
      bitmap: 1/1 pages [4KB], 65536KB chunk

md9 : active raid1 sda1[1]
      530048 blocks super 1.0 [64/1] [_U______________________________________________________________]
      bitmap: 1/1 pages [4KB], 65536KB chunk

unused devices: <none>
/etc/init.d/init_lvm.sh

Code: Select all

[~] # /etc/init.d/init_lvm.sh                                                  
Changing old config name...
Reinitialing...
Detect disk(8, 16)...
ignore non-root enclosure disk(8, 16).
Detect disk(8, 32)...
ignore non-root enclosure disk(8, 32).
Detect disk(8, 0)...
dev_count ++ = 0Detect disk(8, 16)...
ignore non-root enclosure disk(8, 16).
Detect disk(8, 32)...
ignore non-root enclosure disk(8, 32).
Detect disk(8, 0)...
sys_startup_p2:got called count = -1
Done
Tried recover -> attach and recover in QTS
gnome-shell-screenshot-H34AA1.png
thank you for your assistance
You do not have the required permissions to view the files attached to this post.
User avatar
dolbyman
Guru
Posts: 35028
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Reset settings drive volume problem

Post by dolbyman »

then a ticket with qnap could be a good next step
Post Reply

Return to “System & Disk Volume Management”