[PROBLEM] TS-239 not recognising NZ daylight saving

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
rh2600
Starting out
Posts: 24
Joined: Tue Jul 28, 2009 3:33 pm

[PROBLEM] TS-239 not recognising NZ daylight saving

Post by rh2600 » Sun Sep 27, 2009 4:54 am

Daylight saving started in NZ overnight, but when I fired up my QNAP this morning it's still the old time (1 hour behind). I can successfully sync to pool.ntp.org (and even nz.pool.ntp.org) but it's still showing the old date.

Whereabouts does the NAS get the daylight saving status from?

Trenton
New here
Posts: 4
Joined: Tue Sep 15, 2009 9:38 am

Re: [PROBLEM] TS-239 not recognising NZ daylight saving

Post by Trenton » Mon Oct 05, 2009 6:38 am

I'm having the same problem in Australia, having just switched to daylight savings time.

We have a QNAP TS-439 running firmware version 2.1.5 Build 0408T.

Is there a solution to this issue?

shake-the-disease
Know my way around
Posts: 144
Joined: Wed May 14, 2008 6:24 am

Re: [PROBLEM] TS-239 not recognising NZ daylight saving

Post by shake-the-disease » Mon Oct 05, 2009 1:35 pm

Same problem here. In the meantime I changed the time setting and told the NAS to use the time from my computer which did switch to DST correctly.
TS-239 w/ SqueezeCenter 7.7.2, MusicIP, SSOTS 4.14, streaming to SB Touch & Boom, 10k+ tracks
TS-101 --> now sold

Trenton
New here
Posts: 4
Joined: Tue Sep 15, 2009 9:38 am

Re: [PROBLEM] TS-239 not recognising NZ daylight saving

Post by Trenton » Tue Oct 06, 2009 12:11 pm

I got around the problem by setting the time zone to Hobart, as discussed in this post from a year ago.

viewtopic.php?f=50&t=8655&start=0#p39938

User avatar
aesculus
Easy as a breeze
Posts: 321
Joined: Fri Dec 14, 2007 11:17 am

Re: [PROBLEM] TS-239 not recognising NZ daylight saving

Post by aesculus » Wed Oct 07, 2009 12:45 pm

We had this problem in the US last changeover. Since our DST was extended we had to wait for the old date to come around (about 1 month) before the dates would be correct. I think QNAP does not have the correct algorithms for all the countries new DST calcs. I suspect we will experience the same again soon.
Chris

Post Reply

Return to “System & Disk Volume Management”