TS-439 Expantion time

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
Starting out
Posts: 15
Joined: Thu Sep 24, 2009 7:22 pm

TS-439 Expantion time

Post by nitro » Fri Oct 09, 2009 9:28 pm

Hi there,

I have the TS-439 with 3 x 1 TB in, used about 1.03 TB / 1.78 available. I just added another 1 TB disk and hit add drive and its expanding. How long should this usually take. its taken about 45mins to get to 2% at this rate its going to take like a week. I saw the article about viewtopic.php?f=11&t=10268 increasing the speed and did this, but my CPU is only at 20~% and its still going so slow. Ime not accessing any data on the QNAP, cat /proc/sys/dev/raid/speed_limit_min is set to 150000 and max to 300000 .

any ideas?

thanks guys!

Post Reply

Return to “System & Disk Volume Management”