Online RAID Capacity Expansion not working on TS-639.

Questions about SNMP, Power, System, Logs, disk, & RAID.
Post Reply
dikkiedirk
Starting out
Posts: 26
Joined: Thu Dec 24, 2009 7:21 pm

Online RAID Capacity Expansion not working on TS-639.

Post by dikkiedirk »

I havw trouble using Online RAID Capacity Expansion on TS-639.

I want to upgrade my TS-639 from 6 x 1 TB to 6 x 2 TB.

I therefore go into Raid Management Expand Capacity menu and click change for the drive I want to replace. I then get the message Please remove this drive. So I take the drive out. The NAS beeps twice and shows drive ejected. But I never get a message to insert the new drive: 'Please insert the new drive'". Should this message show immediately? I have waited an entire night but still nothing.

When I insert a new drive this drive is not detected and rebuilding wont start.

Please help!
User avatar
lentzit
Been there, done that
Posts: 518
Joined: Thu Dec 27, 2007 7:32 pm
Location: Sweden
Contact:

Re: Online RAID Capacity Expansion not working on TS-639.

Post by lentzit »

I therefore go into Raid Management Expand Capacity menu and click change for the drive I want to replace. I then get the message Please remove this drive. So I take the drive out. The NAS beeps twice and shows drive ejected. But I never get a message to insert the new drive: 'Please insert the new drive'". Should this message show immediately? I have waited an entire night but still nothing.

When I insert a new drive this drive is not detected and rebuilding wont start.
Have you resolved this one...i got the same behaviour on an TS-409 when trying to expand the Raid 6 capacity?
-TVS-663/16GB QTS 4.2 , RAID5
-QGenie QG-103N - Wireless Storage in Classroom Environment
-Services: WEB | Virtual Station | QSYNC | FTP | SSL | Private Cloud | Photo Station
-Using it for my blog (http://blog.lentzit.com)
Post Reply

Return to “System & Disk Volume Management”