BTSync version 2.2.5 on NAS TS-410 Firmware 4.2.0 takes 61 MB of RAM. The system has 256 MB with this it goes to 82% of RAM used and the NAS becomes unusable. BTSync works on LAN below 1 MB/s.
I also disabled LAN encription. Other suggestions ?
BTSync 2.2.5 takes 61Mb (24%) of RAM Filling up all the RAM => NAS unusable
- Iacopo
- Starting out
- Posts: 17
- Joined: Sat Jul 27, 2013 4:34 pm
- Location: Italy
- Contact: