I have configured QVPN on both TS-251+ and my Android smartphone...but after having established the tunnel, if I have to access to my files stored in my nas I hit on Apps in the QVPN Android app, and then again on Qfile....and the Qfile installed on my smartphone starts up asking me to connect to my NAS!!
I a bit confused as I though that QVPN app established already the tunnel + the connection with my nas directly so to use directly apps remotely...
Do I have to launch a connection to the nas using Qfile app so to access to files??
Do I have to create a brand new connection to my nas using maybe some particular IP address?? I see under available connection methods a list of Hosts: By Host/IP, By LAN IP, By myQNAPcloud, By CloudLink, By WAN IP....
Please help me understand this practical new world for me.
Thank you.
Configuring Qfile connection after having established QVPN connection
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
Configuring Qfile connection after having established QVPN connection
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
Re: Configuring Qfile connection after having established QVPN connection
Any one??
Thank you.
Thank you.
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
- dolbyman
- Guru
- Posts: 35268
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Configuring Qfile connection after having established QVPN connection
when the vpn is established, all app communications should be done by lan ip .. nothing else
- PIRATA!
- Know my way around
- Posts: 107
- Joined: Sun Feb 28, 2016 12:05 am
Re: Configuring Qfile connection after having established QVPN connection
Ok, By LAN IP...but I have several LAP IP!!! Should I choose the IP that I have set inside the QVPN page??
Thank you.
QNAP TS-251+ with 2x Seagate IronWolf 4Tb (ST4000VN008)
- dolbyman
- Guru
- Posts: 35268
- Joined: Sat Feb 12, 2011 2:11 am
- Location: Vancouver BC , Canada
Re: Configuring Qfile connection after having established QVPN connection
lan ip of your nas
tunnel subnets should be traversed transparently
tunnel subnets should be traversed transparently