Aruba and Qnap don't get along

Post your questions about myQNAPcloud service here.
Post Reply
Consulmac
New here
Posts: 2
Joined: Sun Apr 21, 2019 1:40 am

Aruba and Qnap don't get along

Post by Consulmac » Sun Apr 21, 2019 1:44 am

Hello,

I have forwarded the necessary ports on Aruba Cloud interface, the DLNA/UPNP is activated but the Qnap cannot automatically forward the necessary ports for connection.

here is my diagnostic if anyone could help I am just about to switch my client's network to Ubiquiti since Aruba is too much too handle...


------ NAT PMP Diagnostics ------
initnatpmp() returned 0 (SUCCESS)
using gateway : 192.168.0.1
sendpublicaddressrequest returned 2 (SUCCESS)
readnatpmpresponseorretry returned -7 (FAILED)
------ UPnP Diagnostics ------
upnpc : miniupnpc library test client. (c) 2006-2011 Thomas Bernard
Go to http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/
for more information.
List of UPNP devices found on the network :
desc: http://192.168.0.118:32469/DeviceDescription.xml
st: upnp:rootdevice

desc: http://192.168.0.118:8200/rootDesc.xml
st: upnp:rootdevice

desc: http://192.168.0.118:8080/upnpd/a821c82fa4.xml
st: upnp:rootdevice

UPnP device found. Is it an IGD ? : http://192.168.0.118:32469/
Trying to continue anyway
Local LAN ip address : 192.168.0.118
GetConnectionTypeInfo failed.
Status : , uptime=72s, LastConnectionError :
Time started : Sat Apr 20 13:35:41 2019
MaxBitRateDown : 0 bps MaxBitRateUp 0 bps
GetExternalIPAddress() returned -3
GetExternalIPAddress failed.
GetGenericPortMappingEntry() returned -3 ((null))
INFO: No any UPnP port mapping entry is found.

P3R
Guru
Posts: 10977
Joined: Sat Dec 29, 2007 1:39 am
Location: Stockholm, Sweden (UTC+01:00)

Re: Aruba and Qnap don't get along

Post by P3R » Mon Apr 22, 2019 6:27 am

Consulmac wrote:
Sun Apr 21, 2019 1:44 am
...the DLNA/UPNP is activated but the Qnap cannot automatically forward the necessary ports for connection.
I wouldn't use UPnP at all and definitely not for a client.
RAID have never ever been a replacement for backups. Without backups on a different system (preferably placed at another site), you will eventually lose data!

A non-RAID configuration (including RAID 0, which isn't really RAID) with a backup on a separate media protects your data far better than any RAID-volume without backup.

All data storage consists of both the primary storage and the backups. It's your money and your data, spend the storage budget wisely or pay with your data!

Consulmac
New here
Posts: 2
Joined: Sun Apr 21, 2019 1:40 am

Re: Aruba and Qnap don't get along

Post by Consulmac » Fri May 03, 2019 3:54 am

UPNP/DLNA is not working anyhow so I got the ports to forward to the QNAP but now my issue is that I can't open OwnCloud from WAN. What port does use OwnCloud usually?

Post Reply

Return to “myQNAPcloud service”