Make accessible from cloud only one volume

Post your questions about myQNAPcloud service here.
Post Reply
Alessio88
New here
Posts: 2
Joined: Fri Jun 18, 2021 6:18 pm

Make accessible from cloud only one volume

Post by Alessio88 »

Hi.
I’ve searched in forum and on guides, but can’t find a u answer.
I’ve a qnap ts431p3 with a raid set with two thick volumes.
Is there a way to make accessible from myqnapcloud only one volume? Or is there a way to select witch shared folders have the permission to be seen on cloud?
Thank You so much.
User avatar
dolbyman
Guru
Posts: 34903
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Make accessible from cloud only one volume

Post by dolbyman »

Never expose your NAS to WAN ...so stop what you are doing!

Also, the NAS file interactions run via shares, so no need to run several volumes on your NAS (unless there is a specific reason to do so..e.g. different disk speeds for different purpose , SSD for IOPS)
Alessio88
New here
Posts: 2
Joined: Fri Jun 18, 2021 6:18 pm

Re: Make accessible from cloud only one volume

Post by Alessio88 »

Sorry but if i want a dropbox like storage without paying, how can I do without exposing my nas?
User avatar
dolbyman
Guru
Posts: 34903
Joined: Sat Feb 12, 2011 2:11 am
Location: Vancouver BC , Canada

Re: Make accessible from cloud only one volume

Post by dolbyman »

You cannot ... if YOU can easily reach it from WAN others can too..thats how it is

What you can do is run a VPN server and enable access from WAN for yourself
Post Reply

Return to “myQNAPcloud service”