I have QNAP TS420 Firware 4.0.2 Window 7 32bit
When I try to connect to QNAP myQNAPcloud Connect 1.1.0 I get the following answer:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
In the control Pannel of VPN Server, I have following settings:
PPTP Settings:
Enable PPTP VPN Server (is clicked on)
VPN Client IP Pool : 10.0.0.2-10.0.0.254
Enable Open VPN Server (is clicked on)
Now, here in RED color I have the follwoing message:
The "OPEN VPN Settings" has been changed, please download the confirgruation fileand update the OpnVPN client.
If I have tried to download the file and upload it but no success. If this is a problem, can some one please let me know the step by step guidline to solve this problem?
Thanks in advance
Unable to connect to MyQNAOcloud service
-
- Starting out
- Posts: 19
- Joined: Wed Nov 06, 2013 4:54 am
- schumaku
- Guru
- Posts: 43578
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: Unable to connect to MyQNAOcloud service
Testing from the same LAN where the NAS is located, or from a different Internet connection? Majority of consumer CPE don't support the so-called NAT loopback - this prohibits establish any connection LAN->public-router-IP->NAS.
-
- Starting out
- Posts: 19
- Joined: Wed Nov 06, 2013 4:54 am
Re: Unable to connect to MyQNAOcloud service
Thanks for your reply.
I have checked with both-same LAN where NAS is located and from a different internet connection. Both has been un-successful...
I have checked with both-same LAN where NAS is located and from a different internet connection. Both has been un-successful...
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: Unable to connect to MyQNAOcloud service
Check your "MyCloudNAS" configuration using the CanYouSeeMe.org - Open Port Check Tool.tyagisk wrote:Thanks for your reply.
I have checked with both-same LAN where NAS is located and from a different internet connection. Both has been un-successful...
Check ports 80/TCP, 443/TCP, 1723/TCP, 8080/TCP, & 8081/TCP to ensure they are "open".
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
- Starting out
- Posts: 19
- Joined: Wed Nov 06, 2013 4:54 am
Re: Unable to connect to MyQNAOcloud service
Thanks for your reply.
I checked and got the following results:
MY ISP is NOT bloking the Port 80
Here is the setting page: Still, when I try to connect to QNAP myQNAPcloud Connect 1.1.0 I get the following answer:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
I checked and got the following results:
MY ISP is NOT bloking the Port 80
Here is the setting page: Still, when I try to connect to QNAP myQNAPcloud Connect 1.1.0 I get the following answer:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
You do not have the required permissions to view the files attached to this post.
- schumaku
- Guru
- Posts: 43578
- Joined: Mon Jan 21, 2008 4:41 pm
- Location: Kloten (Zurich), Switzerland -- Skype: schumaku
- Contact:
Re: Unable to connect to MyQNAOcloud service
Please provide the [Diagnostics] output - just from button above your last screen shoot please (XXX the public IP address) - to check if the Automatic Router Configuration succeeded.
Instead of using the myQNAPcloud Connect for testing (this is creating a VPN connection), please also check from a browser
http://[yourname].myqnapcloud.com:8080/
https://[yourname].myqnapcloud.com/
Instead of using the myQNAPcloud Connect for testing (this is creating a VPN connection), please also check from a browser
http://[yourname].myqnapcloud.com:8080/
https://[yourname].myqnapcloud.com/
- pwilson
- Guru
- Posts: 22533
- Joined: Fri Mar 06, 2009 11:20 am
- Location: Victoria, BC, Canada (UTC-08:00)
Re: Unable to connect to MyQNAOcloud service
So all those ports showed as "open" when you verified them using the CanYouSeeMe tool as I recommeneded? Were they all "open"?tyagisk wrote:Thanks for your reply.
I checked and got the following results:
MY ISP is NOT bloking the Port 80
Here is the setting page: Still, when I try to connect to QNAP myQNAPcloud Connect 1.1.0 I get the following answer:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
Is GRE (Generic Routing Encapsulation) (aka IP Protocol 47) enabled in the unidentified Router? (This is a requirement for PPTP to work).
You keep focusing on the QNAP myQNAPcloud Connect 1.1.0 I tool, but you aren't being forthcoming with information testing the PPTP configuration. Have you tried upgrading to the myQNAPcloud Connect for Windows v1.1.2.Build0717 instead.
Are you trying this from "outside" your network?
(It is unlikely to work from "inside" your network unless your unidentified Router supports NAT-Loopback, (which most consumer Routers don't)).
Anyway, getting you to provide troubleshooting information is too much work. Please contact QNAP Customer Service for further assistance.
Patrick M. Wilson
Victoria, BC Canada
QNAP TS-470 Pro w/ 4 * Western Digital WD30EFRX WD Reds (RAID5) - - Single 8.1TB Storage Pool FW: QTS 4.2.0 Build 20151023 - Kali Linux v1.06 (64bit)
Forums: View My Profile - Search My Posts - View My Photo - View My Location - Top Community Posters
QNAP: Turbo NAS User Manual - QNAP Wiki - QNAP Tutorials - QNAP FAQs
Please review: When you're asking a question, please include the following.
-
- Starting out
- Posts: 19
- Joined: Wed Nov 06, 2013 4:54 am
Re: Unable to connect to MyQNAOcloud service
schumaku wrote:Please provide the [Diagnostics] output - just from button above your last screen shoot please (XXX the public IP address) - to check if the Automatic Router Configuration succeeded.
Instead of using the myQNAPcloud Connect for testing (this is creating a VPN connection), please also check from a browser
http://[yourname].myqnapcloud.com:8080/
https://[yourname].myqnapcloud.com/
Thanks for your reply.
Here is the diagnostics output:
------ NAT PMP Diagnostics ------
initnatpmp() returned 0 (SUCCESS)
using gateway : XXX.XXX.0.1
sendpublicaddressrequest returned 2 (SUCCESS)
readnatpmpresponseorretry returned -7 (FAILED)
------ UPnP Diagnostics ------
upnpc : miniupnpc library test client. (c) 2006-2011 Thomas Bernard
Go to http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/
for more information.
List of UPNP devices found on the network :
desc: http://XXX.XXX.0.1:5431/dyndev/uuid:c8c ... cdb43c0000
st: urn:schemas-upnp-org:device:InternetGatewayDevice:1
Found valid IGD : http://XXX.XXX.0.1:5431/uuid:c8cd72b4-3 ... nnection:1
Local LAN ip address : XXX.XXX.0.8
Connection Type : IP_Routed
Status : Connected, uptime=3989884s, LastConnectionError :
Time started : Wed Sep 25 16:59:38 2013
MaxBitRateDown : 6212000 bps MaxBitRateUp 1122000 bps
ExternalIPAddress = x.xxx.xxx.xxx
0 UDP 61833->XXX.XXX.0.5:61833 'Teredo' ''
1 UDP 61662->XXX.XXX.0.5:61662 'Teredo' ''
2 UDP 51646->XXX.XXX.0.5:51646 'Teredo' ''
3 UDP 62749->XXX.XXX.0.5:62749 'Teredo' ''
4 UDP 58409->XXX.XXX.0.4:58409 'Skype UDP at XXX.XXX.0.4:58409 (2500)' ''
5 TCP 58409->XXX.XXX.0.4:58409 'Skype TCP at XXX.XXX.0.4:58409 (2500)' ''
6 TCP 8080->XXX.XXX.0.8:8080 'Web Admin' ''
7 TCP 443->XXX.XXX.0.8:443 'Secure Web Admin' ''
8 TCP 80->XXX.XXX.0.8:80 'Web Server/Multimedia Station' ''
9 TCP 8081->XXX.XXX.0.8:8081 'Secure Web Server' ''
10 TCP 1723->XXX.XXX.0.8:1723 'PPTP' ''
11 UDP 1194->XXX.XXX.0.8:1194 'Open VPN' ''
12 UDP 57719->XXX.XXX.0.5:57719 'Teredo' ''
13 UDP 50160->XXX.XXX.0.5:50160 'Teredo' ''
14 UDP 26728->XXX.XXX.0.3:26728 'Skype UDP at XXX.XXX.0.3:26728 (2501)' ''
15 TCP 26728->XXX.XXX.0.3:26728 'Skype TCP at XXX.XXX.0.3:26728 (2501)' ''
16 UDP 62132->XXX.XXX.0.5:62132 'Teredo' ''
17 UDP 52850->XXX.XXX.0.5:52850 'Teredo' ''
18 UDP 62714->XXX.XXX.0.5:62714 'Teredo' ''
19 UDP 53539->XXX.XXX.0.5:53539 'Teredo' ''
20 UDP 58075->XXX.XXX.0.5:58075 'Teredo' ''
21 UDP 64830->XXX.XXX.0.5:64830 'Teredo' ''
22 UDP 52165->XXX.XXX.0.5:52165 'Teredo' ''
23 UDP 62545->XXX.XXX.0.5:62545 'Teredo' ''
24 UDP 21623->XXX.XXX.0.3:21623 'Skype UDP at XXX.XXX.0.3:21623 (2505)' ''
25 TCP 21623->XXX.XXX.0.3:21623 'Skype TCP at XXX.XXX.0.3:21623 (2505)' ''
26 UDP 50560->XXX.XXX.0.8:50560 'uTorrent/2210(25130) at XXX.XXX.0.8:50560' ''
27 UDP 6881->XXX.XXX.0.8:6881 'uTorrent/2210(25130) at XXX.XXX.0.8:6881' ''
28 UDP 42364->XXX.XXX.0.5:42364 'Skype UDP at XXX.XXX.0.5:42364 (2505)' ''
29 TCP 42364->XXX.XXX.0.5:42364 'Skype TCP at XXX.XXX.0.5:42364 (2505)' ''
GetGenericPortMappingEntry() returned 713 (SpecifiedArrayIndexInvalid)
Instead of using the myQNAPcloud Connect for testing (this is creating a VPN connection), please also check from a browser
http://[yourname].myqnapcloud.com:8080/
https://[yourname].myqnapcloud.com/[/quote]
I tried to open https://[yourname].myqnapcloud.com/ in Chrome. Response received: "This Web Page is Not Available"
http://[yourname].myqnapcloud.com:8080/ Response Received on Chrome: Oops! Google Chrome could not find http://[yourname].myqnapcloud.com:8080/
-
- Starting out
- Posts: 19
- Joined: Wed Nov 06, 2013 4:54 am
Re: Unable to connect to MyQNAOcloud service
Hello Partick,
I have tried to upgrade to the http://download.qnap.com/Storage/Utilit ... 2.0717.exe myQNAPcloud Connect for Windows v1.1.2.Build0717 and when tried to connect I am still getting the following message:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
All ports are shown open except Protocol 47. I have sky broadband connection and router provided by Sky is Sagemcom. Any idea how to open the port 47? I am sorry, my knowledege is very limited when it comes to networking. But, I am admit, I am keen to learn and I am learning...while staying in this form..
I have tried to upgrade to the http://download.qnap.com/Storage/Utilit ... 2.0717.exe myQNAPcloud Connect for Windows v1.1.2.Build0717 and when tried to connect I am still getting the following message:
"the connection cannot be established. Please make sure you have internet connection and the PPTP VPN server on the NAS is enabled"
All ports are shown open except Protocol 47. I have sky broadband connection and router provided by Sky is Sagemcom. Any idea how to open the port 47? I am sorry, my knowledege is very limited when it comes to networking. But, I am admit, I am keen to learn and I am learning...while staying in this form..