[MyQnapCloud]force Port mapping by itself:ExtPort/ExtSSLPort

Post your questions about myQNAPcloud service here.
User avatar
father_mande
Ask me anything
Posts: 5393
Joined: Mon Oct 06, 2008 6:52 pm
Location: Saint Mande, France

[MyQnapCloud]force Port mapping by itself:ExtPort/ExtSSLPort

Postby father_mande » Sat Aug 16, 2014 4:46 pm

Hi,
EDIT corrected after a big error about the "suspect" ... thanks to schumaku

I am fall in trouble accessing my QNAP from external after CloudLink have been installed ... (even if not directly linked to this fonction ...)
After analyse :

QNAP have a good functionality BEFORE MyQnapCloud + CloudLink (hidden) BUT not used for now ... except manually
... it's additional parameters in uLinux.conf named :
ExtPort, ExtSSLPort for Web Admin, and Web server
HOW : this Port are use to replace (by Upnpn IGD mapping) the port defined (for ex. default) if they are already used ...
... so for ex. if 443 is define for Admin SSL and 443 is already use (by another server, QNAP, etc.) and ExtSSLPort = 4443
so unpnc client send a request to
MAP port 4443 (external view) to QNAP 443 internal port

... if MyQnapCloud after cloudlink install (I don't know before) identify the conflict (Port already forwarded in the router/box ... myQnapCloudGENERATE ITSELF a ExtSSLPort starting with 8082

BUT seem than MyQnapCloud can do sometimes a false analyse ... and force the MAPPING and replace by itself the forwarding ...

ALSO MyQnapCloud display in router the mapping and inform myqnapcloud server ... so IF YOU USE MyQnapCloud only to access your QNAP ... it's O.K. BUT if you try to use by yourself ... and don't identify the auto-mapping of MyQnapCloud... you fall in error

On my system ...
Web SSL port is 7443 (unique in my network) and Web SSL is 8743 (unique in my network) BUT auto mapped (without information) to 8082 and 8083
myqnapcloud access work ... but direct access (before I understand) NOT ...

So take attention ... I think it's possible to clear the Ext[SSL]Port ... but don't know if MyQnapCloudforce again news Ports ... and due to the fact I am in travel ... I can do lot of tests ...

I think better if MyQnapCloud can add a checkbox to said : Admin authorize MyQnapCloud to auto-map Port if they are used ...
because for my case ... it's a FALSE analyse ... so mapping is not needed ... forwarding is enough ...

Philippe.
NB I will open a ticket about this ... BUT inform the forum about ...
Download MyQPKG https://www.father-mande.ovh/
NEW just started : Forum MyQPKG https://www.father-mande.ovh/phpBB3
... due to lack of dedicated forum for NON QNAP QPKG ... community one is "phagocyted" by QNAP (support team member)
... some sub-forum seem inaccessible
... topics on my QPKG are "lost in the flow" of messages ...
... This Forum is under construction so will cover all My QPKG step by step
I don't quit this forum ... just add an option for specific questions about My QPKG

User avatar
father_mande
Ask me anything
Posts: 5393
Joined: Mon Oct 06, 2008 6:52 pm
Location: Saint Mande, France

Re: [cloudlink] force Port mapping by itself:ExtPort/ExtSSLP

Postby father_mande » Sat Aug 16, 2014 4:58 pm

Hi,

For your information ...

Changing original Port, apply, redo to return to previous value, apply ... then go to router auto configuration, uncheck all, apply reselect (new value (correct) are displayed) ... then apply ...

OK now all ports are correct ... and forwarding is used v.s. mapping ...

Philippe.
Download MyQPKG https://www.father-mande.ovh/
NEW just started : Forum MyQPKG https://www.father-mande.ovh/phpBB3
... due to lack of dedicated forum for NON QNAP QPKG ... community one is "phagocyted" by QNAP (support team member)
... some sub-forum seem inaccessible
... topics on my QPKG are "lost in the flow" of messages ...
... This Forum is under construction so will cover all My QPKG step by step
I don't quit this forum ... just add an option for specific questions about My QPKG

User avatar
schumaku
Guru
Posts: 43512
Joined: Mon Jan 21, 2008 4:41 pm
Location: Kloten (Zurich), Switzerland -- Skype: schumaku
Contact:

Re: [cloudlink] force Port mapping by itself:ExtPort/ExtSSLP

Postby schumaku » Sun Aug 17, 2014 6:07 pm

Philippe,

CloudLink does not make use of any port forwarding, so no UPnP IGD controls at all.

Regards,
-Kurt

User avatar
father_mande
Ask me anything
Posts: 5393
Joined: Mon Oct 06, 2008 6:52 pm
Location: Saint Mande, France

Re: [cloudlink] force Port mapping by itself:ExtPort/ExtSSLP

Postby father_mande » Sun Aug 17, 2014 6:44 pm

Hi,

OUPSS! typo ... it's myqnapcloud agent or what name you want ...

Just change become after cloudink installation (I have my trace before and after ... ) ... ... I will make change in my message ...

Apologize for stupid error due to direct write without enough reread ...

hilippe.
Download MyQPKG https://www.father-mande.ovh/
NEW just started : Forum MyQPKG https://www.father-mande.ovh/phpBB3
... due to lack of dedicated forum for NON QNAP QPKG ... community one is "phagocyted" by QNAP (support team member)
... some sub-forum seem inaccessible
... topics on my QPKG are "lost in the flow" of messages ...
... This Forum is under construction so will cover all My QPKG step by step
I don't quit this forum ... just add an option for specific questions about My QPKG

User avatar
schumaku
Guru
Posts: 43512
Joined: Mon Jan 21, 2008 4:41 pm
Location: Kloten (Zurich), Switzerland -- Skype: schumaku
Contact:

Re: [MyQnapCloud]force Port mapping by itself:ExtPort/ExtSSL

Postby schumaku » Mon Aug 18, 2014 4:38 am

The"feature" i's the Automatic Router Configuration, a dedicated (sub-)control of myQNAPcloud.com :geek:


Return to “myQNAPcloud service”

Who is online

Users browsing this forum: No registered users and 15 guests