I have a TVS-671 4Gb RAM, on QTS 4.3.3, virtualizationstation 3. I create a new VM using Windows10 iso, but when i try to start it i get
"Error an exception has occured (2)." then the whole NAS locks and only solution is a hard reboot!
Anyone seen this before?
i know my router Does NOT support UPnP, do i need to forward ports?
thanks
Creating New VM error
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Creating New VM error
I would check you CPU, HDD, and Display VM's settings to start with. Did you install the VM Guest Tools?
I have a Win10 VM running just fine on the latest VS 3.x
I have a Win10 VM running just fine on the latest VS 3.x
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- New here
- Posts: 3
- Joined: Thu Jan 21, 2016 1:03 am
Re: Creating New VM error
Hi Trexx, yes allocated 2 cores, memory 2GB, did not see setting for display!, i thought Guest tools could only be installed once windows installation finished?
- Trexx
- Ask me anything
- Posts: 5393
- Joined: Sat Oct 01, 2011 7:50 am
- Location: Minnesota
Re: Creating New VM error
So are you getting the error DURING the install, or after the install?mbs77 wrote:Hi Trexx, yes allocated 2 cores, memory 2GB, did not see setting for display!, i thought Guest tools could only be installed once windows installation finished?
Paul
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
Model: TS-877-1600 FW: 4.5.3.x
QTS (SSD): [RAID-1] 2 x 1TB WD Blue m.2's
Data (HDD): [RAID-5] 6 x 3TB HGST DeskStar
VMs (SSD): [RAID-1] 2 x1TB SK Hynix Gold
Ext. (HDD): TR-004 [Raid-5] 4 x 4TB HGST Ultastor
RAM: Kingston HyperX Fury 64GB DDR4-2666
UPS: CP AVR1350
Model:TVS-673 32GB & TS-228a Offline[/color]
-----------------------------------------------------------------------------------------------------------------------------------------
2018 Plex NAS Compatibility Guide | QNAP Plex FAQ | Moogle's QNAP Faq
-
- New here
- Posts: 3
- Joined: Thu Jan 21, 2016 1:03 am
Re: Creating New VM error
During the install
-
- New here
- Posts: 5
- Joined: Sat May 28, 2011 3:55 am
Re: Creating New VM error
Confirming exactly the same issue, trying to setup Ubuntu VM . See attached screenshot
I updated to the latest QNAP 4.3, rebooted several times. Made sure everything is writable.
I updated to the latest QNAP 4.3, rebooted several times. Made sure everything is writable.
You do not have the required permissions to view the files attached to this post.
-
- First post
- Posts: 1
- Joined: Fri Aug 21, 2015 1:40 am
Re: Creating New VM error
I have the same issue after the lattes update, all my current VMs work but I am not able to create new ones I keep getting the error 2 once I hit start to turn on the machine and begin the installation. Anyone figure out anything yet?