[QSonarr] [2.0.0.5338] Smart PVR for newsgroup and bittorrent users
-
- Getting the hang of things
- Posts: 90
- Joined: Tue Dec 23, 2014 3:51 pm
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
hmm… I downloaded the package Stephane linked to after your post and I still can't properly update. And there's no Nzbdrone.update folder in the Nzbdrone folder.
edit: Nevermind, didn't read the rest of the thread. I'll revert Qmono back to the previous package and then update using your method.
edit: Nevermind, didn't read the rest of the thread. I'll revert Qmono back to the previous package and then update using your method.
- Xmantium
- Been there, done that
- Posts: 579
- Joined: Fri Sep 03, 2010 3:55 am
- Location: Manchester, England
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Please can you make an ARM version or universal version
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Sorry i dont have ARM Toolchain under hand to compile Mono and not sure it is feasibleXmantium wrote:Please can you make an ARM version or universal version
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 24
- Joined: Fri May 23, 2014 5:40 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
@QNAP_Stephane
Thanks for the package, been wanting to run NZBDrone for a long time!
I have installed the Mono 3.12 package, and the Sonarr 2.0.0.3154 package.
Updating to 2.0.0.3212 doesn't report any errors during the process, but the log reveals:
Unrelated (maybe), but in http://forum.qnap.com/viewtopic.php?f=214&t=109446 you mention that Sonarr should work with Mono 4.0.1. Is that incorrect or is the info in the first post outdated here?
Thanks!
Thanks for the package, been wanting to run NZBDrone for a long time!
I have installed the Mono 3.12 package, and the Sonarr 2.0.0.3154 package.
Updating to 2.0.0.3212 doesn't report any errors during the process, but the log reveals:
Code: Select all
15-6-4 20:03:45.0|Info|UpdateApp|Starting Sonarr Update Client
15-6-4 20:03:45.1|Info|UpdateApp|Updating Sonarr to version 2.0.0.3212
15-6-4 20:03:45.2|Debug|UpdateApp|NzbDrone process ID: 32278
15-6-4 20:03:45.2|Debug|UpdateApp|Arguments:
15-6-4 20:03:45.2|Debug|UpdateApp| 32278
15-6-4 20:03:45.2|Debug|UpdateApp| /tmp/nzbdrone_update
15-6-4 20:03:45.2|Debug|UpdateApp| /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-4 20:03:45.2|Debug|UpdateApp| /nobrowser
15-6-4 20:03:45.2|Debug|UpdateApp|Using executing application: /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-4 20:03:45.2|Debug|UpdateApp|Executable location: /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-4 20:03:45.2|Info|UpdateApp|Starting update process. Target Path:/share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone
15-6-4 20:03:45.2|Info|InstallUpdateService|Verifying requirements before update...
15-6-4 20:03:45.2|Debug|ProcessProvider|Finding process with Id:32278
15-6-4 20:03:45.2|Warn|ProcessProvider|Unable to find process with ID 32278
15-6-4 20:03:45.2|Fatal|UpdateApp|An error has occurred while applying update package.
System.ArgumentException: Process with ID doesn't exist 32278
at NzbDrone.Update.UpdateEngine.InstallUpdateService.Verify (System.String targetFolder, Int32 processId) [0x000c3] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateEngine\InstallUpdateService.cs:72
at NzbDrone.Update.UpdateEngine.InstallUpdateService.Start (System.String installationFolder, Int32 processId) [0x00000] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateEngine\InstallUpdateService.cs:76
at NzbDrone.Update.UpdateApp.Start (System.String[] args) [0x00020] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateApp.cs:59
at NzbDrone.Update.UpdateApp.Main (System.String[] args) [0x00042] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateApp.cs:43
Unrelated (maybe), but in http://forum.qnap.com/viewtopic.php?f=214&t=109446 you mention that Sonarr should work with Mono 4.0.1. Is that incorrect or is the info in the first post outdated here?
Thanks!
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
QMono 3.12 is known to be unstable (Mainly with MediaBrowser - Emby )
Qmono 4.0.1 is may be too recent to support some feature
I recommend use Qmono 3.10...
Qmono 4.0.1 is may be too recent to support some feature
I recommend use Qmono 3.10...
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 14
- Joined: Sat Mar 07, 2015 8:31 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
@QNAP_Stephane
First of thanks for taking the time to make this!
I have installed the Mono 3.10 package, and the Sonarr 2.0.0.3154 package.
When attempting to update to 2.0.0.3212 I get the following errors:
I believe the problem is due to the backup of the database being saved to the /tmp (tmpfs) directory which has insufficient space (64MB) to backup my full database plus the other required files for update which kills the update mid process. To get Sonarr working again I need to reboot the NAS and reinstall the original Sonarr 2.0.0.3154 package which fixes the ramdisk errors. I believe if you were to compile a new .qpkg with the latest version it would work, but I have a feeling others will run into the same issue with large databases trying to update.
Thanks!
First of thanks for taking the time to make this!
I have installed the Mono 3.10 package, and the Sonarr 2.0.0.3154 package.
When attempting to update to 2.0.0.3212 I get the following errors:
Code: Select all
"171","Error","2015-06-04","10:58:17","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"170","Error","2015-06-04","10:58:15","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"169","Error","2015-06-04","10:56:51","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"168","Error","2015-06-04","10:56:50","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"167","Error","2015-06-04","10:56:48","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"166","Error","2015-06-04","10:56:00","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/etc/config/qpkg.conf], section = [QSonarr], field = [Login_Screen], value = [0]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"165","Error","2015-06-04","10:55:57","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/etc/config/qpkg.conf], section = [QSonarr], field = [Visible], value = [1]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
"164","Error","2015-06-04","10:53:45","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/share/CACHEDEV1_DATA/.versioning/monitor/monitor.err], section = [], field = [Err], value = [-61]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
Thanks!
-
- New here
- Posts: 2
- Joined: Sat Aug 09, 2014 4:20 pm
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Hi All,
Just ran through an update to the latest version which failed with the error details below, looks like it's referencing an invalid processID?
Also, updated to the latest version of QMONO 4.0.1.0 based on the wiki info below.
Any ideas?
Cheers,
Adam
Just ran through an update to the latest version which failed with the error details below, looks like it's referencing an invalid processID?
Also, updated to the latest version of QMONO 4.0.1.0 based on the wiki info below.
Any ideas?
Cheers,
Adam
Mono version is less than 3.2, upgrade for improved stability
Sonarr is written in .Net and requires Mono to run. Versions of 3.2 and above resolved various stability issues we experienced in the past. Updating to at least version 3.2 is therefore highly recommended.
Code: Select all
15-6-5 17:53:00.8|Info|UpdateApp|Starting Sonarr Update Client
15-6-5 17:53:00.9|Info|UpdateApp|Updating Sonarr to version 2.0.0.3212
15-6-5 17:53:00.9|Debug|UpdateApp|NzbDrone process ID: 21817
15-6-5 17:53:00.9|Debug|UpdateApp|Arguments:
15-6-5 17:53:00.9|Debug|UpdateApp| 21817
15-6-5 17:53:00.9|Debug|UpdateApp| /tmp/nzbdrone_update
15-6-5 17:53:00.9|Debug|UpdateApp| /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-5 17:53:00.9|Debug|UpdateApp| /nobrowser
15-6-5 17:53:00.9|Debug|UpdateApp|Using executing application: /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-5 17:53:00.9|Debug|UpdateApp|Executable location: /share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone/NzbDrone.exe
15-6-5 17:53:00.9|Info|UpdateApp|Starting update process. Target Path:/share/CACHEDEV1_DATA/.qpkg/QSonarr/NzbDrone
15-6-5 17:53:00.9|Info|InstallUpdateService|Verifying requirements before update...
15-6-5 17:53:00.9|Debug|ProcessProvider|Finding process with Id:21817
15-6-5 17:53:00.9|Warn|ProcessProvider|Unable to find process with ID 21817
15-6-5 17:53:00.9|Fatal|UpdateApp|An error has occurred while applying update package.
System.ArgumentException: Process with ID doesn't exist 21817
at NzbDrone.Update.UpdateEngine.InstallUpdateService.Verify (System.String targetFolder, Int32 processId) [0x000c3] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateEngine\InstallUpdateService.cs:72
at NzbDrone.Update.UpdateEngine.InstallUpdateService.Start (System.String installationFolder, Int32 processId) [0x00000] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateEngine\InstallUpdateService.cs:76
at NzbDrone.Update.UpdateApp.Start (System.String[] args) [0x00020] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateApp.cs:59
at NzbDrone.Update.UpdateApp.Main (System.String[] args) [0x00042] in m:\BuildAgent\work\6c3239faf2b92630\src\NzbDrone.Update\UpdateApp.cs:43
-
- Easy as a breeze
- Posts: 420
- Joined: Mon Sep 10, 2007 4:27 pm
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Just wanted to let you know that I had a problem with the update function inside QSonarr like others have reported before.
The problem was solved by doing the following:
remove QMono 4.0.1
switch off QSonarr in QTS
install QMono 3.10.0
switch on QSonarr
perform a manual update install in QSonarr
perform a manual restart in QSonarr.
My QSonarr qpkg-version is 1.50521.
The problem was solved by doing the following:
remove QMono 4.0.1
switch off QSonarr in QTS
install QMono 3.10.0
switch on QSonarr
perform a manual update install in QSonarr
perform a manual restart in QSonarr.
My QSonarr qpkg-version is 1.50521.
-
- Starting out
- Posts: 10
- Joined: Wed Dec 31, 2014 10:42 pm
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Anyone know if there is a way to manually change this setting and what location I should change it to? I've been using Sonarr for a while and this has been an issue plaguing me from the jump and doesn't seem to be fixed no matter what compiled version I install.cronus130 wrote:@QNAP_Stephane
First of thanks for taking the time to make this!
I have installed the Mono 3.10 package, and the Sonarr 2.0.0.3154 package.
When attempting to update to 2.0.0.3212 I get the following errors:
I believe the problem is due to the backup of the database being saved to the /tmp (tmpfs) directory which has insufficient space (64MB) to backup my full database plus the other required files for update which kills the update mid process. To get Sonarr working again I need to reboot the NAS and reinstall the original Sonarr 2.0.0.3154 package which fixes the ramdisk errors. I believe if you were to compile a new .qpkg with the latest version it would work, but I have a feeling others will run into the same issue with large databases trying to update.Code: Select all
"171","Error","2015-06-04","10:58:17","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "170","Error","2015-06-04","10:58:15","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "169","Error","2015-06-04","10:56:51","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "168","Error","2015-06-04","10:56:50","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "167","Error","2015-06-04","10:56:48","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/var/hw_serial_number], section = [Hardware], field = [serial number], value = [Q152I20197]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "166","Error","2015-06-04","10:56:00","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/etc/config/qpkg.conf], section = [QSonarr], field = [Login_Screen], value = [0]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "165","Error","2015-06-04","10:55:57","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/etc/config/qpkg.conf], section = [QSonarr], field = [Visible], value = [1]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance." "164","Error","2015-06-04","10:53:45","System","127.0.0.1","localhost","The system is unable to save your settings (file = [/share/CACHEDEV1_DATA/.versioning/monitor/monitor.err], section = [], field = [Err], value = [-61]) due to insufficient ramdisk space. If restarting the server does not solve the problem please contact support for further assistance."
Thanks!
Thanks in advance.
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Weird issue,
does your home is well available for admin ?
I can eventually rebuild the application exporting home in a custom directory on RAID DATA Lun.. i think this could fix issue
but user who already use it will have to reinstall it and duplicate their actual files in the home admin to the new location to not loose their actual information related to Sonarr
does your home is well available for admin ?
I can eventually rebuild the application exporting home in a custom directory on RAID DATA Lun.. i think this could fix issue
but user who already use it will have to reinstall it and duplicate their actual files in the home admin to the new location to not loose their actual information related to Sonarr
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 14
- Joined: Sat Mar 07, 2015 8:31 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
The home directory does appear to be available with the admin account. The other possibility I thought of that might fix the issue would be to include an option in the update settings to run updates without doing a backup of the database if that is possible? If that can't be done I would have no problem recreating or moving my settings over to a new location if that resolves the issue.
Thanks for the update!
Thanks for the update!
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
didnt check that point,
Thanks for this notification
i will make a symlink pointing from /tmp/nzbdrone_backup and /tmp/nzbdrone_update that should fix this issue
Thanks for this notification
i will make a symlink pointing from /tmp/nzbdrone_backup and /tmp/nzbdrone_update that should fix this issue
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 14
- Joined: Sat Mar 07, 2015 8:31 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
Perfect!
Could you give a notification when the changes have been made so we can test the fix? I believe it would require a new .qpkg being created allowing for a manual install/upgrade over the current version rather then an automatic update?
Thanks again!
Could you give a notification when the changes have been made so we can test the fix? I believe it would require a new .qpkg being created allowing for a manual install/upgrade over the current version rather then an automatic update?
Thanks again!
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
just make some quick test, seems Sonarr doenst like symlink for update, if i add symlink i cant update anymore with :cronus130 wrote:Perfect!
Could you give a notification when the changes have been made so we can test the fix? I believe it would require a new .qpkg being created allowing for a manual install/upgrade over the current version rather then an automatic update?
Thanks again!
Code: Select all
CommandExecutor Error occurred while executing task ApplicationUpdate: Directory does not exist.
may be removing those directories when qpkg stop, it can be a work around.. those both directories are created when you launch the updater
will be better if Sonarr could make some cleaning after an update
just post a github issue ( https://github.com/Sonarr/Sonarr/issues/600 )
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Know my way around
- Posts: 100
- Joined: Tue Nov 11, 2014 5:53 am
Re: [ QSonarr ] [ 1.150521 ] Smart PVR for newsgroup and bit
I'm trying on my 251. Works fine but don't update.
I'm a sickrage user, but lately it fails snatching the series, so i'm looking and found sonarr...
Interface is great... Thanks for the port to QPKG
I'm a sickrage user, but lately it fails snatching the series, so i'm looking and found sonarr...
Interface is great... Thanks for the port to QPKG