Page 1 of 7
[ Baikal ] [ 0.9.2.0 ] Lightweight CalDAV+CardDAV server
Posted: Mon Apr 20, 2015 8:53 pm
by QNAP_Stephane
Source :
http://baikal-server.com/
Download :
https://www.myqnap.org/?s=baikal
With the 0.7.0 release, our configuration format was updated to use YAML files. You need to go through the installer again but we pre-fill most values with the ones from your old installation. We recommend that you make a full backup of your data, as a safety measure. Starting with 0.7.0, Baikal stores data in both the Specific and the config folders. Keep this in mind when upgrading!
Re: [ QBaikal ] [ 0.2.7.0.1 ] Lightweight CalDAV+CardDAV ser
Posted: Tue May 12, 2015 12:10 am
by Waldi-X
Hello,
I installed QBaikal today. It automatically created the File "....qpkg/QBaikal/WWW/Specific/ENBABLE_INSTALL". If I would like to start Baikal it fails with: "Fehler: Gesicherte Verbindung fehlgeschlagen. Die Verbindung zu 192.x.y.z:31443 wurde unterbrochen, während die Seite geladen wurde."
You write:
listen on port 31000
add /admin to the end of URL for administration login
But I do not know, how to realize it, because I am not an expert in linux. Could you explain that in detail?
Tanks.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.1 ] Lightweight CalDAV+CardDAV ser
Posted: Sun May 17, 2015 5:05 pm
by Waldi-X
Hi,
now 235 users view my question in meantime. It would be nice, if anybody could help me.
Thanks a lot.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.1 ] Lightweight CalDAV+CardDAV ser
Posted: Mon May 18, 2015 2:59 am
by QNAP_Stephane
Hi
not sure to understand your issue
what is the meaning of the sentence in German ?
Re: [ QBaikal ] [ 0.2.7.0.1 ] Lightweight CalDAV+CardDAV ser
Posted: Wed May 20, 2015 3:35 pm
by Waldi-X
QNAP_Stephane wrote:
....
what is the meaning of the sentence in German ?
Hi,
the translated sentence: "Error: Secured connection missed. The connection to 192.x.y.z:31443 one interrupted, while the side was loaded."
I tried many options to connect with baikal:
-
https://192.x.y.z:31443 (klick on Baikal-Icon)
URL by hand:
-
https://192.x.y.z:31443/admin
-
https://192.x.y.z:31000
-
http://192.x.y.z:31000
-
http://192.x.y.z:31000/admin
-->>> but nothing works. Something must wrong or is not activated - but which?
Thank you very much for replies.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Wed May 20, 2015 11:52 pm
by QNAP_Stephane
i found a bug indeed in https, it should work better with 0.2.7.0.2 version
let me know
if not please log in SSH and give me the output for :
Code: Select all
[~] # /etc/init.d/QBaikal.sh stop
[~] # /etc/init.d/QBaikal.sh start
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Thu May 21, 2015 5:31 pm
by Waldi-X
Hi QNAP_Stephane,
thanks for your work.
Now I installed manuell QBaikal 0.2.7.0.2 ->> Icon on QNAP-Window
Klick Icon: ->>
http://192.x.y.z:31000 accepted, but opend window is only complete white
URL by hand: ->>
http://192.x.y.z:31000/admin accepted, but opend window is only complete white
Then login - how you recommended:
Code: Select all
[~] # /etc/init.d/QBaikal.sh stop
[~] # /etc/init.d/QBaikal.sh start
file exists
file exists
[~] #
All URLs the same reactions!
Then I rebooted QNAP: nothing changed
Quintessence: a step further, but not succesfull.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Thu May 21, 2015 7:24 pm
by QNAP_Stephane
no error, that weird
can it be a browser issue ?
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Wed Jul 15, 2015 4:58 am
by MustangsGM
I do have the same issue. Just white pages. And I did test a few browsers. Does not seem to be the issue.
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Wed Jul 15, 2015 4:18 pm
by Waldi-X
Hi,
thanks, I already it thought that I would be too stupid. But it is very unfortunate that there is probably no remedy.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.2 ] Lightweight CalDAV+CardDAV ser
Posted: Tue Jul 21, 2015 4:12 am
by Perlbo76
Exactly same Problem here. Testet with Safari and Firefox and SSH shows same "no Problems" Only white Page
Code: Select all
[~] # /etc/init.d/QBaikal.sh stop
[~] # /etc/init.d/QBaikal.sh start
file exists
file exists
Re: [ QBaikal ] [ 0.2.7.0.3 ] Lightweight CalDAV+CardDAV server
Posted: Tue Oct 20, 2015 1:49 pm
by QNAP_Stephane
fixed for QTS 4.2
Re: [ QBaikal ] [ 0.2.7.0.3 ] Lightweight CalDAV+CardDAV server
Posted: Wed Oct 21, 2015 7:19 pm
by Waldi-X
Hi QNAP_Stephane,
thanks lot for your work. Now all is fine.
Waldi-X
Re: [ QBaikal ] [ 0.2.7.0.3 ] Lightweight CalDAV+CardDAV server
Posted: Thu Oct 22, 2015 8:45 pm
by Dimaxa
Hi got the problem! Latest version installs but not working
in terminal:
/$ /etc/init.d/QBaikal.sh start
ln: /opt/QBaikal/QBaikal: File exists
file exists
file exists
apache: Syntax error on line 203 of /share/HDA_DATA/.qpkg/QBaikal/apache.conf: Could not open configuration file /etc/config/apache/extra/apache-fastcgi.conf: No such file or directory
I've got TS-119P+ 4.2.0
Any thoughts?
Re: [ QBaikal ] [ 0.2.7.0.3 ] Lightweight CalDAV+CardDAV server
Posted: Fri Oct 23, 2015 2:10 am
by QNAP_Stephane
mmmmm not sure TS-119P+ is running under fastcgi
i need to check