[ QBaikal ] [ 0.6.0.1 ] Lightweight CalDAV+CardDAV server

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
antonsack
New here
Posts: 2
Joined: Sat Jul 15, 2017 7:41 pm

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by antonsack » Thu Jul 20, 2017 6:21 pm

Nobody? :-(

Waldi-X
Starting out
Posts: 13
Joined: Wed Jul 10, 2013 5:21 pm
Location: Stuttgart

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Waldi-X » Sat Jul 29, 2017 10:57 pm

SpiridonLouis wrote:... install on a 4.3.3 QNAP ....


QBaikal 0.2.. worked very well on QNAP FW 4.2... :-)
Yesterday I installed FW 4.3.3 QNAP maiden-like and QBaikal 0.4.6.
In dir ..Specific/db I copied my backuped sqlite.db

Result:
- QBaikal Admin Install worded well and reconized my old sqlite.db. :-)
- But I can not connect to this data: :-(
-> QNAP: WEBDAV allowed
-> "https://myhost:8081/baikal/html/dav.dhl/calendars/myname/default"

Could someone help?
Thanks.
Waldi-X
FW: 4.3.3.0238 :-(

Waldi-X
Starting out
Posts: 13
Joined: Wed Jul 10, 2013 5:21 pm
Location: Stuttgart

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Waldi-X » Tue Aug 08, 2017 9:52 pm

QNAP_Stephane wrote:Thanks a lot for the Info :)


Hi Stephane,
I posted this:

viewtopic.php?f=121&t=133677&p=628768#p628768

could you help? Thanks.
Waldi-X
FW: 4.3.3.0238 :-(

cottager
New here
Posts: 2
Joined: Sun Oct 08, 2017 11:51 pm

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by cottager » Mon Oct 09, 2017 12:00 am

I had some difficulty getting access from an iPhone to the calendar, so I thought I'd mention what worked in case others need this info. If this information is somewhere in this thread, I never found it.

For outlook 2010 and Mac OS X calendar app, I was able to use this server address/uri: "SERVER/baikal/cal.php/calendars/USER/default/". However, this would not work for iOS. I would see green checkmarks and it seemed to be fine. I could go into Calendars and add it, but it gave a message that it couldn't connect. After some looking at path information, I instead tried "SERVER/baikal/cal.php/principals/USER/". Or cal.php can be dav.php, which is what I wrote down in my docs for either caldav or carddav.

Waldi-X
Starting out
Posts: 13
Joined: Wed Jul 10, 2013 5:21 pm
Location: Stuttgart

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Waldi-X » Mon Oct 09, 2017 4:18 pm

Hello,

perhaps:
"https://myhost:xxxx/baikal/html/dav.dhl/calendars/myname/default"
FW: 4.3.3.0238 :-(

Meister_Knobi
New here
Posts: 7
Joined: Sat Nov 11, 2017 7:02 am

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Meister_Knobi » Mon Nov 13, 2017 12:56 am

Hello,

i have problems to connecting any Device to my 0.4.6 instalation.

in my browser i can connect via https://192.168.178.10:8081/baikal/card ... r/default/ but any other device (android 6.? with DAVDroid, ios, thunderbird with SoGo) it didnt work, i tried various urls for card.php, cal.php and even dav.php, including all listet urls above. Nothing worked for me.

I hope you guys have some advise for me.

halol
Getting the hang of things
Posts: 96
Joined: Thu Aug 09, 2012 9:43 pm

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by halol » Tue Feb 06, 2018 6:42 am

Hello,
Has anybody been able to send invitations when adding meetings to the calendar? I haven't been able to get this working, but I don't know if this is an issue with QBaikal only or if this is a more general problem with Baikal.
Thanks.
TVS-663

User avatar
mydjtl
Getting the hang of things
Posts: 76
Joined: Wed Jan 11, 2017 7:52 am

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by mydjtl » Wed Feb 07, 2018 11:18 am

Will this sync my outl0ook and google calendars? WOrth trying as I wait for QcalAgent

http://files.qnap.com/news/pressresourc ... 171221.pdf
TS-251
(2) Seagate IronWolf 12TB 7200 RPM 256MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drives
8gb RAM in one slot. 4.3.3

Parlendir
New here
Posts: 4
Joined: Tue May 30, 2017 12:19 am

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Parlendir » Wed Mar 07, 2018 8:07 pm

Meister_Knobi wrote:Hello,

i have problems to connecting any Device to my 0.4.6 instalation.

in my browser i can connect via https://192.168.178.10:8081/baikal/card ... r/default/ but any other device (android 6.? with DAVDroid, ios, thunderbird with SoGo) it didnt work, i tried various urls for card.php, cal.php and even dav.php, including all listet urls above. Nothing worked for me.

I hope you guys have some advise for me.


Have you tried sth like
https://192.168.178.10:8081/baikal/dav.php/calendars/<user> ?

Thank you very much for this App, it works like a charm :)
TS451 - 3*3To WD Red - Raid 5 - QTS 4.3.4.0516

Parlendir
New here
Posts: 4
Joined: Tue May 30, 2017 12:19 am

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by Parlendir » Wed Mar 28, 2018 5:42 pm

Did someone succeeded in making Baikal working with QCalAgent ?

I tried many parameters, but didn't succeeded in making it work.

Parameters needed are :

Account type : Advanced
Username : <user>
Password : <pw>
Server Address : you have to enter at least 2 digits between the dots to have the "Sign in" button to work... : 192.168.0.1 won't work, but 192.168.00.01 will..
I tried : 000.000.000.000 : didn't work
ip_nas : 192.168.xyz.xyz : didn't work
localhost : didn't work
Server Path : for Baikal, it is like : /baikal/dav.php/calendars/<user>
Port : by default : 8081

Use SSL : with or without

Maybe is it due to the beta version...

I got an idea, but don't know how to check it out : as QcalAgent is installed as a container app, it has an ip address like 10.0.1.5 in the nas control panel / virtual switch.
But in the same time, my network dhcp gives ip address like 192.168.x.x. Maybe it could be an issue with the virtual switch.
TS451 - 3*3To WD Red - Raid 5 - QTS 4.3.4.0516

maczet
New here
Posts: 4
Joined: Tue Sep 04, 2018 3:14 am

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by maczet » Wed Sep 12, 2018 3:02 am

Hi.
I need make backup of my data from Baikal or create backup application?
How can I create it?

presenceofmind
Know my way around
Posts: 138
Joined: Thu May 26, 2016 3:05 pm

Re: [ QBaikal ] [ 0.4.6.0 ] Lightweight CalDAV+CardDAV server

Post by presenceofmind » Thu Apr 25, 2019 4:53 am

hi qnap_stephane,

The new version is out. could you update qpak.

cheers

User avatar
QNAP_Stephane
Experience counts
Posts: 3315
Joined: Wed Mar 27, 2013 1:00 am

Re: [ QBaikal ] [ 0.5.1 ] Lightweight CalDAV+CardDAV server

Post by QNAP_Stephane » Thu Apr 25, 2019 8:16 pm

updated to 5.1

Note : update for 0.4.x to 0.5.x may not work properly
--------------------------------------------------------------------------
QnapClub AppCenter - https://www.qnapclub.eu
--------------------------------------------------------------------------

presenceofmind
Know my way around
Posts: 138
Joined: Thu May 26, 2016 3:05 pm

Re: [ QBaikal ] [ 0.5.1 ] Lightweight CalDAV+CardDAV server

Post by presenceofmind » Fri Apr 26, 2019 8:08 am

Hi qnap_stephane,

Is it possible to install the new version without loosing data from 0.4.6?

Update:

It works but a bit bizarre.

after the qpkg update, baikal tries to upgrade the db to 0.5.1. It returned successful.

But then, It tried upgrading the db again and returned failed (already done).

So I closed the browser and tried accessing the website again and it worked.

Good job Qnap_stephane.

Cheers

presenceofmind
Know my way around
Posts: 138
Joined: Thu May 26, 2016 3:05 pm

Re: [ QBaikal ] [ 0.5.1 ] Lightweight CalDAV+CardDAV server

Post by presenceofmind » Fri Jul 12, 2019 4:15 am

Hi QNAP_Stephane,

Baikal 0.5.3 has been released. Could you update qnap baikal pkg.

Cheers

Post Reply

Return to “Community Apps”