[ QNZBGet ] [ 21.1.1] Usenet Grabber
-
- New here
- Posts: 7
- Joined: Fri Jun 26, 2015 10:28 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
The link says use with QTS 4.2.1 - any problems with 4.2.3 on TS-451?
-
- Starting out
- Posts: 12
- Joined: Wed Oct 12, 2016 6:24 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Easy way to update:
In QNZBget go to settings, system, check for update, then update to 18.0.
Best,
A
In QNZBget go to settings, system, check for update, then update to 18.0.
Best,
A
-
- Starting out
- Posts: 17
- Joined: Tue Jul 19, 2016 11:21 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
All of a sudden I cannot reach nzbget.
I have stopped and started an number of ties.
It sees to be running.
Error message is when opening from inside QNAP - Secured connections (https://) are not supported for this application.Are you sure you want to open. Yes / No.
Yes, leads to - Can-t connect to server.
Haven't made and changes intentionally.
Any ideas?
I have stopped and started an number of ties.
It sees to be running.
Error message is when opening from inside QNAP - Secured connections (https://) are not supported for this application.Are you sure you want to open. Yes / No.
Yes, leads to - Can-t connect to server.
Haven't made and changes intentionally.
Any ideas?
-
- First post
- Posts: 1
- Joined: Sat Apr 01, 2017 3:52 am
Re: [ QNZBGet ] [ 17.1.0 ] Usenet Grabber
If its not, as I think I deleted the download folder when I setup my NAS the first time. I have created a folder NZBGet off the share itself (so /share/NZBGet).QNAP_Stephane wrote:correct if NZBget exists in Download
Do I just point it to that folder I created, or should QNZBGet have created a folder that I am missing?
I have set the permissions to RW in the webUI of the folder on the NAS. I guess I should check it from the CLI when I get home.
-
- Getting the hang of things
- Posts: 75
- Joined: Thu Apr 30, 2015 3:43 am
Re: [ QNZBGet ] [ 17.1.0 ] Usenet Grabber
I finally was able to update to v18. I removed previous version (16.4) and then installed v18. When importing configuration, I only selected NEWS-SERVERS, SECURITY, CATEGORIES and it is working now.
hallux wrote:I did a settings backup, updated, and then restored, after restart I get a 404 not found error. Tried the x86 and x64 versions, same thing. Also I noticed this are 10% the size of the old 16.4 version.
Anyone knows what could be happening?
Thanks.
Regards,
Luciano.
-
- New here
- Posts: 4
- Joined: Wed Apr 19, 2017 12:56 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Installed latest QNAP OS stable update today and now QNZBGET user/pass I had configured is no longer working.
-
- Getting the hang of things
- Posts: 75
- Joined: Thu Apr 30, 2015 3:43 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Probably your configuration was overwritten. It happens every time you install over it. You will need to restore your config from a backup or redo it. Just happened to me with the 64bit upgrade, and happened last time going from 16.4 to 18.
-
- New here
- Posts: 6
- Joined: Wed Mar 02, 2011 6:13 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Hello any one help the new qnap update firmware has stopped the nzbget app working ,so I uninstalled it update to latest version all good I can now access the webpage now issues
I lost all my settings not a problem server settings all in
but its not downloading to the NZBGET folder on the nas any more why , do I have to change the paths ???
please help was working all fine till the new firmware thank you
I lost all my settings not a problem server settings all in
but its not downloading to the NZBGET folder on the nas any more why , do I have to change the paths ???
please help was working all fine till the new firmware thank you
-
- Getting the hang of things
- Posts: 75
- Joined: Thu Apr 30, 2015 3:43 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Yes you have to change the path accordingly. There is information regarding that in this thread.
-
- New here
- Posts: 6
- Joined: Wed Mar 02, 2011 6:13 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
hallux wrote:Yes you have to change the path accordingly. There is information regarding that in this thread.
hi where about is that page please been looking last few hours thank you
-
- New here
- Posts: 6
- Joined: Wed Mar 02, 2011 6:13 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
any one please help thank you
this don't work as path
NZBGet/downloads
this don't work as path
NZBGet/downloads
-
- Getting the hang of things
- Posts: 75
- Joined: Thu Apr 30, 2015 3:43 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
In my case, I am using /share/CACHEDEV1_DATA/Download/NZBGet as MainDir Path, set yours accordingly.
-
- New here
- Posts: 6
- Joined: Wed Mar 02, 2011 6:13 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
when I FTP to the nas the directory path above is show nothing else ,
it works but nothing goes in the folders hence the path is not correct so confused now
/NZBGet/downloads but I have a feeling that's not the root might more in front of it
it works but nothing goes in the folders hence the path is not correct so confused now
/NZBGet/downloads but I have a feeling that's not the root might more in front of it
-
- New here
- Posts: 4
- Joined: Mon Apr 17, 2017 4:04 am
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Is it possible to work on TS-228? I've tried installing all 3 ARM versions and they fail at 1% with no entry in error log...
-
- New here
- Posts: 2
- Joined: Sat Jan 04, 2014 8:18 pm
Re: [ QNZBGet ] [ 18.0.0 ] Usenet Grabber
Hello, what version for TS-420 ARM
Greet
Greet