Hello,
just wanted to let you know.
Installations on a TS-230 with the TS-x28a package was without problems.
[ QNZBGet ] [ 21.1.1] Usenet Grabber
-
- Getting the hang of things
- Posts: 61
- Joined: Thu Mar 11, 2010 6:50 pm
- Location: Frankfurt - Germany
-
- New here
- Posts: 6
- Joined: Mon Jun 07, 2010 6:12 pm
Re: [ QNZBGet ] [ 20.0.0 ] Usenet Grabber
Could someone please help me out.
I have an older TS-410. I used to run 0.6.0 from QNAP, this worked perfectly. However: some problems with unrarring made me look for newer versions. The unit has a 800Mhz CPU and 256MB RAM.
I can install QNZBGet_21.0.0_arm-x19.qpkg without problems, the auto update also works perfectly.
When I setup everything the download speeds starts perfectly. And smaller NZB downloads (400-500MB, using 10MB parts) works great. However: when I start a 10GB download that has 250MB RAR files the first 1 or 2 RAR files download perfectly and then the speed drops from 10MB to 100-200Kbs. When this happens I see error messages "Cancelling hanging download" without any other messages/errors. I have followed the guide to improve speed, and the CPU / mem use gets better but the problem stays.
The QNAP seems to "choke" in the first/second large file that is downloaded and I do not understand what is going on. Any help?
When I setup NZBGET 0.7.0. again I am not seeing this problem, even when I test the same NZB files: the older version does not have this problem.
I have an older TS-410. I used to run 0.6.0 from QNAP, this worked perfectly. However: some problems with unrarring made me look for newer versions. The unit has a 800Mhz CPU and 256MB RAM.
I can install QNZBGet_21.0.0_arm-x19.qpkg without problems, the auto update also works perfectly.
When I setup everything the download speeds starts perfectly. And smaller NZB downloads (400-500MB, using 10MB parts) works great. However: when I start a 10GB download that has 250MB RAR files the first 1 or 2 RAR files download perfectly and then the speed drops from 10MB to 100-200Kbs. When this happens I see error messages "Cancelling hanging download" without any other messages/errors. I have followed the guide to improve speed, and the CPU / mem use gets better but the problem stays.
The QNAP seems to "choke" in the first/second large file that is downloaded and I do not understand what is going on. Any help?
When I setup NZBGET 0.7.0. again I am not seeing this problem, even when I test the same NZB files: the older version does not have this problem.
-
- New here
- Posts: 6
- Joined: Mon Jun 07, 2010 6:12 pm
Re: [ QNZBGet ] [ 20.0.0 ] Usenet Grabber
Anyone? @QNAP_Stephane ?
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QNZBGet ] [ 20.0.0 ] Usenet Grabber
no idea... your NAS is EOL
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 22
- Joined: Fri May 18, 2012 9:06 pm
Re: [ QNZBGet ] [ 20.0.0 ] Usenet Grabber
I upgraded to QTS 4.5.3.1652 on a TS-431P and now it complains about an invalid signature of the QNZBGet app.
What can i do? Do i really have to disable the signature check?
What can i do? Do i really have to disable the signature check?
TS-431P, QTS 4.5.3, 3x Hitachi HDS5C3030ALA630 3TB, 1x Toshiba DT01ACA300 3TB
-
- First post
- Posts: 1
- Joined: Thu Dec 19, 2019 2:11 am
Re: [ QNZBGet ] [ 20.0.0 ] Usenet Grabber
Hi Folks,
Does anyone have a copy of the qnzbget package, specifically for TS-NASX86_64? The page on the qnap store is reporting 404:
https://www.qnapclub.eu/en/qpkg/226
I reported this error to them many hours ago, but they haven't responded.
Regards,
Jamie.
Does anyone have a copy of the qnzbget package, specifically for TS-NASX86_64? The page on the qnap store is reporting 404:
https://www.qnapclub.eu/en/qpkg/226
I reported this error to them many hours ago, but they haven't responded.
Regards,
Jamie.
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QNZBGet ] [ 21.1.0 ] Usenet Grabber
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Jun 11, 2017 2:07 am
Re: [ QNZBGet ] [ 21.1.0 ] Usenet Grabber
I installed this yesterday and now I get a certificate error:QNAP_Stephane wrote: ↑Sat Oct 29, 2022 5:33 pm updated to 21.1
new link : https://www.myqnap.org/product/nzbget/
TLS certificate verification failed for nzbget.net: certificate has expired. For more info visit http://nzbget.net/certificate-verification
Which action is recommended (I run this off a QNAP TS-251 with the latest FW) ?
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ QNZBGet ] [ 21.1.1] Usenet Grabber
can you please give a try to version : 21.1.1
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Jun 11, 2017 2:07 am
Re: [ QNZBGet ] [ 21.1.1] Usenet Grabber
Apologies for the delayed feedback .....
I did DL and install this one - it seemed to work for a bit, but the same error is back again
So I did the following:
- Set CertCheck to 'No' (Settings>Security>CertCheck)
- Save and Reload
- Install version nzbget 21.2-testing-r2333 (as this version specifically fixed "fixed certificate validation issue for many sites using Lets Encrypt TLS certificates (#784).")
- Set CertCheck to 'Yes' (Settings>Security>CertCheck)
- Save and Reload