[ QNZBGet ] [ 21.1.1] Usenet Grabber

This is the best place for community developers to publish their genius work. Your Apps enrich the QNAP Turbo NAS.
Post Reply
michael.mamodaly
New here
Posts: 6
Joined: Sat Nov 07, 2015 7:50 am

Re: [ QNZBGet ] [ 16.3 ] Usenet Grabber

Post by michael.mamodaly »

QNAP_Stephane wrote:i have no idea, may be a bug on 16.3
I will try older versions.

Thanks.
hobbbes
First post
Posts: 1
Joined: Thu Dec 03, 2015 5:27 am

Re: [ QNZBGet ] [ 16.3 ] Usenet Grabber

Post by hobbbes »

Hi,

noob here! i've tried both v16.3 and v16.0 and everytime I get an unpack error. Any suggestions?

I can't seem to manually unpack them unrar either. Could it be my permissions on the share? When I copy the files to a local disk, I can then unpack them.....

TS-451 with 8gig ram.

Thanks in advance!
Spy_be
New here
Posts: 5
Joined: Thu Oct 29, 2015 5:24 pm

Re: [ QNZBGet ] [ 16.3 ] Usenet Grabber

Post by Spy_be »

hallux wrote:I have exactly the same issue.
michael.mamodaly wrote:Hello,

First, thanks Stephane for your job ! I've downloaded multiple of your packages !

However i have an issue with this one. Everytime i go to settings --> save, some lines are added to the configuration file :
Category2.DestDir
Category2.Unpack
Category2.PostScript
[...]

If i save 10 times, i'll have 10 times this block in my config file.

Am I the only one ? I've tried reinstalling multiple times already..

Thanks !
Same for me. It worked fine few days ago but today it's going crazy

When I edit things on the category section, nzbget stops instantly because configuration corruption
User avatar
QNAP_Stephane
Experience counts
Posts: 4802
Joined: Wed Mar 27, 2013 1:00 am

Re: [ QNZBGet ] [ 16.3 ] Usenet Grabber

Post by QNAP_Stephane »

i see 16.4 is available.. i schedule to compile it asap

may be it will solve this issue
---------------------------------------------------------------------------------------------------------------------------

Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW

----------------------------------------------------------------------------------------------------------------------------
Spy_be
New here
Posts: 5
Joined: Thu Oct 29, 2015 5:24 pm

Re: [ QNZBGet ] [ 16.3 ] Usenet Grabber

Post by Spy_be »

Spy_be wrote:
hallux wrote:I have exactly the same issue.
michael.mamodaly wrote:Hello,

First, thanks Stephane for your job ! I've downloaded multiple of your packages !

However i have an issue with this one. Everytime i go to settings --> save, some lines are added to the configuration file :
Category2.DestDir
Category2.Unpack
Category2.PostScript
[...]

If i save 10 times, i'll have 10 times this block in my config file.

Am I the only one ? I've tried reinstalling multiple times already..

Thanks !
Same for me. It worked fine few days ago but today it's going crazy

When I edit things on the category section, nzbget stops instantly because configuration corruption
The only workaround I found :

1) Delete Qnzbet
2) Reinstall it
3) backup conf file
4) edit it manually with textedit/notepad and put all info inside (create directly the categories inside)
5) Restore it to nzbget

Now it works, but if I touch anything on NZBGet configuration on the GUI, I got the same error again and again.

Maybe there's a read issue with the conf file ?
User avatar
QNAP_Stephane
Experience counts
Posts: 4802
Joined: Wed Mar 27, 2013 1:00 am

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by QNAP_Stephane »

updated to 16.4
---------------------------------------------------------------------------------------------------------------------------

Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW

----------------------------------------------------------------------------------------------------------------------------
Spy_be
New here
Posts: 5
Joined: Thu Oct 29, 2015 5:24 pm

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by Spy_be »

QNAP_Stephane wrote:updated to 16.4
Thanks Stephane, I will try this one !

But I think a found the issue with the conf file :

the conf template is located here according to the settings : /opt/QNZBGet/share/nzbget/nzbget.conf

When I get there through SSH, I see the file but it has all my modification included. This file should normally not be edited with my settings.
However, the file located on /opt/QNZBGet/etc/nzbget.conf (which should be the file containing our own setting) is still with default settings.

So, I was wondering if we could force nzbget to use the edited conf file located at /opt/QNZBGet/etc/nzbget.conf and keep the one located at /opt/QNZBGet/share/nzbget/nzbget.conf with default value ?

Thanks a lot

EDIT :

So I finally found the solution : edit the conf file to : /opt/QNZBGet/share/nzbget/nzbget1.conf (be sure to have that file in your path)
The nzbget.conf located in the same path will store all the settings.
User avatar
QNAP_Stephane
Experience counts
Posts: 4802
Joined: Wed Mar 27, 2013 1:00 am

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by QNAP_Stephane »

i removed in this version the /opt/QNZBGet/etc path
not sure why it was here may be on my previous version

i checked the code is creating symlink in /etc and /share/$datadir/NZBGET pointing to /opt/QNZBGet/share/nzbget/nzbget.conf

if any change required let me know
---------------------------------------------------------------------------------------------------------------------------

Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW

----------------------------------------------------------------------------------------------------------------------------
SpikeyWelsh
Starting out
Posts: 31
Joined: Sat Sep 25, 2010 11:03 pm

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by SpikeyWelsh »

have started getting

PP-FAILURE on all my downloads for sickrage

has anyone got any idears where i can tart looking for whats gone wrong

have also got this error on trying to update

Update NZBGet

Currently installed: 16.3

Check failed. Please try again later.
Hanky1
First post
Posts: 1
Joined: Wed Jul 09, 2014 4:17 pm

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by Hanky1 »

Same problem here
SpikeyWelsh
Starting out
Posts: 31
Joined: Sat Sep 25, 2010 11:03 pm

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by SpikeyWelsh »

not sure what updated think it was a sickrage update thats messed it up
SpikeyWelsh
Starting out
Posts: 31
Joined: Sat Sep 25, 2010 11:03 pm

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by SpikeyWelsh »

have got it working by pointing sickragr to serch in the nb\get folder so it works at the momnt its just the script wont
deiniolj
New here
Posts: 9
Joined: Tue Sep 22, 2015 4:05 am

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by deiniolj »

New user to NZBget and was having a play with it yesterday, and I am on 16.4. I am getting the unpack error, I have no problems with SABNZBd, could it be a permissions problem.. Would really like to use this program..
nutcasey
Getting the hang of things
Posts: 78
Joined: Sun Feb 24, 2013 1:34 am

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by nutcasey »

I'm on the latest version of this and I can't seem to access it any more. I keep seeing this:

Code: Select all

This webpage is not available

ERR_CONNECTION_REFUSED
ReloadHide details
Google Chrome's connection attempt to 192.168.1.13 was rejected. The website may be down, or your network may not be properly configured.
Check your Internet connection
Check any cables and reboot any routers, modems, or other network devices you may be using.
Allow Chrome to access the network in your firewall or antivirus settings.
If it is already listed as a program allowed to access the network, try removing it from the list and adding it again.
If you use a proxy server...
Check your proxy settings or contact your network administrator to make sure the proxy server is working. If you don't believe you should be using a proxy server: Go to Applications > System Preferences > Network > Advanced > Proxies and deselect any proxies that have been selected.
Does anyone know why? QSonarr was working fine with it yesterday but since a restart I can't seem to load this at all.
User avatar
Toxic17
Ask me anything
Posts: 6469
Joined: Tue Jan 25, 2011 11:41 pm
Location: Planet Earth
Contact:

Re: [ QNZBGet ] [ 16.4 ] Usenet Grabber

Post by Toxic17 »

Have your tried restarting the Webserver?
Regards Simon

Qnap Downloads
MyQNap.Org Repository
Submit a ticket • QNAP Helpdesk
QNAP Tutorials, User Manuals, FAQs, Downloads, Wiki
When you ask a question, please include the following


NAS: TS-673A QuTS hero h5.1.2.2534 • TS-121 4.3.3.2420 • APC Back-UPS ES 700G
Network: VM Hub3: 500/50 • UniFi UDM Pro: 3.2.9 • UniFi Network Controller: 8.0.28
USW-Aggregation: 6.6.61 • US-16-150W: 6.6.61 • 2x USW Mini Flex 2.0.0 • UniFi AC Pro 6.6.62 • UniFi U6-LR 6.6.62
UniFi Protect: 2.11.21/8TB Skyhawk AI • 3x G3 Instants: 4.69.55 • UniFi G3 Flex: 4.69.55 • UniFi G5 Flex: 4.69.55
Post Reply

Return to “Community Apps”