No one?politby wrote:Greetings
I just got a TS-1635 and installed the x41 version which runs great - until I try to configure it with my ** pcsc reader. It just says it can't initialize the reader and then dies.
No support for pcsc? If so which reader should I be using?
[ OsCAM ] [ 1.20.11717 ] Card Server
-
- Starting out
- Posts: 10
- Joined: Sun Jul 23, 2017 12:36 am
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
No, sorry
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
I've activated IPv6 on the NAS and thus the connection to TVHeadend works again. But that can not be the purpose of the cause.Norin wrote:thanks for addressing this issue, how can i disable it to test?
edit:
Hey @Qnap_Stephane i know can connect... because iam a noob and press buttons without knowing what they will do i went to network settings of my nas and enabled ipv6... and know it connects to tvh... it was so easy to fix this.
Because i didn´t know how to disable ipv6 on oscam and i didn´t have network i went to search that option and is easy, just enable ipv6 on network and virtual switches settings.
your qpkg works fine.
@Ted377 try to do that if it´s possible on your NAS
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- Know my way around
- Posts: 104
- Joined: Thu Nov 24, 2016 8:18 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
well it was just an easy fix for me But i see your point.
TS-453A
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
Try it with this cardreader. It works wonderfully.politby wrote:Greetings
I just got a TS-1635 and installed the x41 version which runs great - until I try to configure it with my ** pcsc reader. It just says it can't initialize the reader and then dies.
No support for pcsc? If so which reader should I be using?
EASYMOUSE 2 USB PREMIUM
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
I have the problem that the "CCCAM" of the server is no longer available
to edit
After 5 minutes the server is reachable with the message
cccam: Binding request failed (address family is not supported by the protocol), wait another 119 seconds
to edit
After 5 minutes the server is reachable with the message
cccam: Binding request failed (address family is not supported by the protocol), wait another 119 seconds
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
I also think that it is support from ipv6
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
I once created a new OScam 11420
without IPv6
with USB support (Smartreader)
http://filehorst.de/d/ccJsplDs
without IPv6
with USB support (Smartreader)
http://filehorst.de/d/ccJsplDs
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
Which devices or architectures are supported?lieschen1983 wrote:I once created a new OScam 11420
without IPv6
with USB support (Smartreader)
http://filehorst.de/d/ccJsplDs
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
Ted377 wrote:Which devices or architectures are supported?lieschen1983 wrote:I once created a new OScam 11420
without IPv6
with USB support (Smartreader)
http://filehorst.de/d/ccJsplDs
Intel Atom
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11400 ] Card Server
Too bad, then I have to wait for the ARM version. I hope that QNAP_Stephane can do something else.lieschen1983 wrote:Ted377 wrote:Which devices or architectures are supported?lieschen1983 wrote:I once created a new OScam 11420
without IPv6
with USB support (Smartreader)
http://filehorst.de/d/ccJsplDs
Intel Atom
Last edited by Ted377 on Mon May 14, 2018 10:29 pm, edited 1 time in total.
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
updated (ipv6 disable)
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
Great WorkQNAP_Stephane wrote:updated (ipv6 disable)
Thank you !!
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
you are welcome
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
Hello QNAP_Stephane, can you bring an update to Rev. 11432 ?
Many Thanks
Many Thanks
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+