[ OsCAM ] [ 1.20.11717 ] Card Server

Ted377 · Post by **Ted377** » Fri Jul 19, 2019 1:30 am

Changeset 11532

[dvbapi] Small fix to previous commit

Ted377 · Post by **Ted377** » Wed Aug 07, 2019 2:34 am

Changeset 11537

[dvbapi] Reworked "ca_pmt_cmd_id" skipping logic
According to the spec ( https://www.dvb.org/resources/public/st ... 221.V1.pdf), the "ca_pmt_cmd_id"
value shall be present inside the ES info loop. Unfortunately, each dvbapi client does each own thing. The
only reliable way to detect when this info is present in the CA PMT is to actually check its value, like it
was done in the old code.
Most boxes always send the typical value of 0x01 (ok_descrambling) and the above check works fine because
there is no descriptor_tag 0x01 to get confused with. On the contrary, for enigma2, values like 0x03 (query),
0x04 (not_selected) are possible (not yet, but soon). Skipping these higher values the same way will not work,
because descriptors with such tags can exist, so a different check is implemented for enigma2.
In practice, this commit fixes the VDR dvbapi plugin, as well as the enigma2 boxes with wrong dvbapi boxtype
setting ("none" instead on the correct "dreambox" - the setting is irrelevant now, but will make a difference
in the future, so make sure you set it correctly).

QNAP_Stephane · Post by **QNAP_Stephane** » Wed Aug 07, 2019 7:11 pm

OsCam updated

rajaz · Post by **rajaz** » Sun Aug 11, 2019 7:49 pm

Hi,

could you compile OScam 11537 for ts 439 PRO II+ QTS 4.2.6
Many thanks

Ted377 · Post by **Ted377** » Tue Aug 13, 2019 8:36 pm

rajaz wrote: ↑Sun Aug 11, 2019 7:49 pm Hi,

could you compile OScam 11537 for ts 439 PRO II+ QTS 4.2.6
Many thanks

Have you ever looked in the store to see if the version for your NAS is available?
QNAP CLUB STORE

rajaz · Post by **rajaz** » Fri Aug 16, 2019 3:24 am

For my model is not there any.

Ted377 · Post by **Ted377** » Mon Dec 09, 2019 8:14 pm

Changeset 11571

Could you please update to the current version.
Thanks a lot !

QNAP_Stephane · Post by **QNAP_Stephane** » Tue Dec 10, 2019 9:59 pm

updated

Ted377 · Post by **Ted377** » Wed Dec 11, 2019 5:52 am

QNAP_Stephane wrote: ↑Tue Dec 10, 2019 9:59 pm updated

Great

Thank you very much

Ted377 · Post by **Ted377** » Mon Apr 06, 2020 7:41 pm

Changeset 11578

larsky · Post by **larsky** » Fri May 08, 2020 11:37 pm

Hello Stephane,

would it be possible to update to the newest version (11578)?

Thanks a lot in advance:)

Stay safe and best regards
Lars

QNAP_Stephane · Post by **QNAP_Stephane** » Sat May 09, 2020 12:07 am

no problem ... in Qnapclub Repo in a few minutes

larsky · Post by **larsky** » Sat May 09, 2020 12:57 am

Great support! You're fantastic!
Thanks a lot!

Alexss · Post by **Alexss** » Sat Jun 06, 2020 1:55 pm

hi
i don't find for arm qnap 119+ with and without emu...

Ted377 · Post by **Ted377** » Tue Aug 11, 2020 8:40 pm

Alexss wrote: ↑Sat Jun 06, 2020 1:55 pm hi
i don't find for arm qnap 119+ with and without emu...

https://cdn.qnapclub.eu/qpkg_artifacts/ ... m-x19.qpkg

QNAP NAS Community Forum

[ OsCAM ] [ 1.20.11717 ] Card Server

Re: [ OsCAM ] [ 1.20.11517 ] Card Server

Re: [ OsCAM ] [ 1.20.11517 ] Card Server

Re: [ OsCAM ] [ 1.20.11537 ] Card Server

Re: [ OsCAM ] [ 1.20.11537 ] Card Server

Re: [ OsCAM ] [ 1.20.11537 ] Card Server

Re: [ OsCAM ] [ 1.20.11537 ] Card Server

Re: [ OsCAM ] [ 1.20.11537 ] Card Server

Re: [ OsCAM ] [ 1.20.11571 ] Card Server

Re: [ OsCAM ] [ 1.20.11571 ] Card Server

Re: [ OsCAM ] [ 1.20.11571 ] Card Server

Re: [ OsCAM ] [ 1.20.11571 ] Card Server

Re: [ OsCAM ] [ 1.20.11571 ] Card Server

Re: [ OsCAM ] [ 1.20.11578 ] Card Server

Re: [ OsCAM ] [ 1.20.11578 ] Card Server

Re: [ OsCAM ] [ 1.20.11578 ] Card Server