[ OsCAM ] [ 1.20.11717 ] Card Server
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
It has become very quiet here. Will there be an update soon?
The last update is already 5 months ago.
The last update is already 5 months ago.
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
hello together today I have installed the latest firmware on my Qnap now wants the Qnap my Smartreader no longer recognize or recognizes the now as a USV
Power loss detected on USV. System would be shutdown after 5 minute (s).
I get the message when I insert the reader into the USB
Power loss detected on USV. System would be shutdown after 5 minute (s).
I get the message when I insert the reader into the USB
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
Hello guys, we are now at Rev 11444 arrived.
This version includes some bugfixes for various Smartcards.
Is it possible to update to the current version?
I would be delighted. Thank you
This version includes some bugfixes for various Smartcards.
Is it possible to update to the current version?
I would be delighted. Thank you
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
need more times for update it
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
hello I have a problem with the latest QTS
and indeed my Qnap always goes off after a short time because the Smartreader is recognized as a USV
and indeed my Qnap always goes off after a short time because the Smartreader is recognized as a USV
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
built x64 version (next version will come later)
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 26
- Joined: Fri Jan 06, 2012 4:58 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
updated: config files are vanished (defaults) Seems like it does not take over configurations
If you have snapshots turned on, you can try to restore backuped files
If you have snapshots turned on, you can try to restore backuped files
Code: Select all
find /mnt/snapshot/ -name oscam.*
Model: TS-453B 16GB
Disks: [RAID-5] 3 x 12TB WD120
Disks: [RAID-5] 3 x 12TB WD120
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
have you tutorial for me ?
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
Big THANK YOU on my part for the update.
Happy new year
Happy new year
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- Starting out
- Posts: 11
- Joined: Mon Jul 07, 2014 12:49 am
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
Thank You
-
- New here
- Posts: 7
- Joined: Fri May 27, 2011 12:46 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
Hi @ all,
ich have a problem with OScam and my QNAP TS-674 (64 Bit).
The OSCam works but it shows me only IPV6 addresses at the admin and at the readers!?
How can i configure that to localhost (127.0.0.0)?
Thanks a lot!
Best regards
BK
ich have a problem with OScam and my QNAP TS-674 (64 Bit).
The OSCam works but it shows me only IPV6 addresses at the admin and at the readers!?
How can i configure that to localhost (127.0.0.0)?
Thanks a lot!
Best regards
BK
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
No way… IPV6 must be desabled.brainkiller2000 wrote: ↑Wed Jan 30, 2019 12:21 am Hi @ all,
ich have a problem with OScam and my QNAP TS-674 (64 Bit).
The OSCam works but it shows me only IPV6 addresses at the admin and at the readers!?
How can i configure that to localhost (127.0.0.0)?
Thanks a lot!
Best regards
BK
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11420 ] Card Server
lieschen1983 wrote: ↑Fri Dec 28, 2018 5:41 pm hello I have a problem with the latest QTS
and indeed my Qnap always goes off after a short time because the Smartreader is recognized as a USV
Ted377 wrote: ↑Tue Mar 05, 2019 6:39 pm Following statement from Qnap Support ...
At the moment I have the version_4.3.5_20181114 reinstalled. That was the last working release in which the UPS problem does not exist.At the moment, I can only advise you to stick to the firmware that you are working on, until the changelog of a future update explicitly states that the UPS problem has been resolved.
I can assure you that the issue is currently being handled with great emphasis by our developers in Taiwan.
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
- Ted377
- Know my way around
- Posts: 234
- Joined: Sat Jul 02, 2016 11:48 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
@QNAP_Stephane… I designed the OScam Icon a bit friendlier and more appropriate.
Is that alright for you?
TAKE A LOOK
Is that alright for you?
TAKE A LOOK
QNAP TS-431P3
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
FW: QTS 5.0.1.2277 build 20230112
CPU: Annapurna Labs Alpine AL-314 Quad-Core CPU @ 1,7GHz
RAM: 8GB DDR3
HDD: 16TB / WD Red WD40EFRX
STB: Apple TV 4K
Front-End: MrMC
Back-End: TVHeadend
TUNER: KATHREIN EXIP 418
SATELLITE DISH: SELFSAT H22DQ+
-
- New here
- Posts: 7
- Joined: Fri May 27, 2011 12:46 pm
Re: [ OsCAM ] [ 1.20.11444 ] Card Server
Thank you!
Ted377 wrote: ↑Wed Feb 20, 2019 2:11 pmNo way… IPV6 must be desabled.brainkiller2000 wrote: ↑Wed Jan 30, 2019 12:21 am Hi @ all,
ich have a problem with OScam and my QNAP TS-674 (64 Bit).
The OSCam works but it shows me only IPV6 addresses at the admin and at the readers!?
How can i configure that to localhost (127.0.0.0)?
Thanks a lot!
Best regards
BK