addedLoxodroom wrote:@QNAP_Stephane first off all thanks for your work and then, is there also a arm-x19 version coming?
I'm trying to get Oscam working on a TS 119 using a triple reader. Cards are recognized including entitlements, but no descrambling. The logs tell's no "DVBapi" found.
[ OsCAM ] [ 1.20.11717 ] Card Server
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Thanks @QNAP_Stephane, I'm gonna use it and let you know my experience's by a feedback, Thanks again!!
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Hi QNAP_Stephane,
The special cross... arm-x19.qpkg can't be installed on my NAS that is to say, impossible to connect to IP:8589 is all what it shows. The actual version, is no problem but as I wrote before dvbapiau................not found. I'm still searching what it is, a server or client issue.
The special cross... arm-x19.qpkg can't be installed on my NAS that is to say, impossible to connect to IP:8589 is all what it shows. The actual version, is no problem but as I wrote before dvbapiau................not found. I'm still searching what it is, a server or client issue.
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
i have no ARMV5 to test (((
i will try to find one
i will try to find one
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Okay, hope you find one, thanks in advance!
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Loxodroom wrote:Okay, hope you find one, thanks in advance!
think i found the issue, could you please redownload same archive and try again
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
I managed to install your updated file and open it, so I could configure server-files. Connection between server and client no problem, but contrary to the original 11222 version I now don't see both any readers and card-entitlements in the Oscam-status screen. I'm using a smargo triple reader (two cards) with the following lines in oscam.server-file (protocol = smartreader and device = TripleP1,2;Serial:00000ab9)
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
i have no idea
i compiled it same way than the x86 version which seems to run fine
i compiled it same way than the x86 version which seems to run fine
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Okay and thanks anyway, I'll stick to your earlier version and try to find a solution in both the server and the client-files although that might be a needle in a haystack. I've worked on it for
some time, I'll be back with my results.
some time, I'll be back with my results.
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Update, work in progress the QNAP/APP/OsCAM_1.20.11222_arm-x19.qpkg.zip is partial working!
A stupid little typo was the problem but there is still some finetuning to do.
A stupid little typo was the problem but there is still some finetuning to do.
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Still working on it, although both readers are recognized only one seems to work more or less properly, (not all channels open) witch means that I can use one card at the moment. Will try the OsCAM_1.20.10991_arm-x19.qpkg.zip version as well. Something is missing in my oscam configuration. I still have an second server-client configuration for watching TV.
-
- First post
- Posts: 1
- Joined: Thu Apr 14, 2016 3:56 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Hi QNAP_Stephane,
thank you for your work! i own a TS-131 and i got your Oscam x31 for ARM working. But i have a question.
If i copy a huge list of files to my nas while oscam is running, Oscam refuses the Cardreader. Could it be that the ARM7 CPU is to slow to do such jobs at the same time?
Greets
thank you for your work! i own a TS-131 and i got your Oscam x31 for ARM working. But i have a question.
If i copy a huge list of files to my nas while oscam is running, Oscam refuses the Cardreader. Could it be that the ARM7 CPU is to slow to do such jobs at the same time?
Greets
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
hi
i have no idea
i have no idea
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
-
- Starting out
- Posts: 10
- Joined: Sun Mar 27, 2016 7:48 pm
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Qnap_Stephane the version I mentioned earlier works perfect! That is to say, for me only one cardreader is now completely decoding my Conax Abbo. The second reader (Seca-Mediagard) only shows entitlement's, and that's all. I guess its more an oscam configuration issue witch I up until now could'nt resolve, then an package problem. So again, thanks for your work!
- QNAP_Stephane
- Experience counts
- Posts: 4802
- Joined: Wed Mar 27, 2013 1:00 am
Re: [ OsCAM ] [ 1.20.11222 ] Card Server
Cool... thanks for the feedback
---------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------
Find all QPKG in the MyQnap.org repository https://www.myqnap.org
join our discord server for any inquiry related to qpkg - https://discord.gg/4fPxHSWKQW
----------------------------------------------------------------------------------------------------------------------------