[ OsCAM ] [ 1.20.11717 ] Card Server

[m.a.d]

Now I have change the OsCAM Binary manually with a precompiled one (i568) from a board and it works fine.
Very sad to have change this good package manually for working with Smargo Reader.

m.a.d

[QNAP_Stephane]

I will do it.. that s weird... whish i have time to investigate this prob

[QNAP_Stephane]

added an untouched version corresponding to the binaries version from website

[Friedhofsblond]

Hi Stephane,
I want to buy a TS-131p or TS-231p.
I use an USB-Easymouse-Premium as a card reader.
(Still working on the raspberry-oscamserver)
Which package could I use?
Or is better for oscam a TS-128 / TS-281 (Cortex-A7)?
Thanks for the answer

[QNAP_Stephane]

Hi

x41 should work

[Friedhofsblond]

Sorry, we have crossed.
So TS-131/231/231+ or TS-128/228 right?

[QNAP_Stephane]

to my opinion x31p is better than x28 (never had between hand at this time, x28 is entry level)

[Friedhofsblond]

Sorry, the TS-x31p is a x41 Typ ??

[anders_r]

Hello,

Is there a working version of OSCAM for the good old TS-109II running 3.3.3 ?

Best regards
anders_r

[heaky]

Hello,

I try to use an ACR38U reader (pcsc) with version 'OsCAM_1.20.11289_x86_64.qpkg.zip' on a QNAP 569 Pro with FW 4.3.3.0136, but with no luck.

Scan USB function gives the following output:

Bus 008 Device 002: ID 072f:90cc Advanced Card Systems, Ltd ACR38 SmartCard Reader
iProduct 2 CCID USB Reader
iSerial 0

---------

Configured the reader as 'pcsc' with device '0'. Log shows: 'Cannot open device: 0' And Oscam crashed with a minute.

Someone more luck or ideas?

[kasper58]

Help
I can't for the life of me figure what the device label should be in the OsCAM reader config file. The entry I put in, OsCAM treats as a file.

Please advise.

Code: Select all

lsusb -v
Bus 001 Device 003: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
  iManufacturer           1 Argolis BV
  iProduct                2 Smartreader2 plus
  iSerial                 3 WLK25

Code: Select all

dmesg
 usbcore: registered new interface driver ftdi_sio
 usbserial: USB Serial support registered for FTDI USB Serial Device
 ftdi_sio 1-4:1.0: FTDI USB Serial Device converter detected
 usb 1-4: Detected FT232BM
 usb 1-4: FTDI USB Serial Device converter now attached to ttyUSB0
[

Excerpt from Oscam reader

Code: Select all

[reader]
label                         = Smargo
description                   = Smargo
protocol                      = smargo
device                        = Serial:WLK25
caid                          = 0958
detect                        = cd
ident                         = 0958:000000
group                         = 1
emmcache                      = 1,3,31,0
auprovid                      = 1F1F1F

[Ted377]

Hi

x41 should work

Hi Stephane,

i need your help !!
I got an TS-231P and the x41 doesn't work.
Current Version: QTS 4.3.3.0277
I can install the App and that's it.
Cannot open the UI.

Can you PLEASE update to the latest Version

[Ted377]

None who can help me ?
Does anyone have the same problem ?
I am despairing
On my TS-212P everything worked without problems.

[Ted377]

I got OsCAM_1.20.10991_arm-x31. This is the only Version that will work on my TS-231P.

[Ted377]

no more support?