[QPKG] sherpa: a mini-package-manager (CLI) beta
-
- Getting the hang of things
- Posts: 95
- Joined: Thu Nov 19, 2015 8:44 am
Re: [SCRIPT] Sherpa
I figured it out. I just added back the cache from before. It was trying to read cache folder but wasn't seeing much of anything and apparently wasn't smart enough to recreate it.
- OneCD
- Guru
- Posts: 12163
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
-
- Getting the hang of things
- Posts: 95
- Joined: Thu Nov 19, 2015 8:44 am
Re: [SCRIPT] Sherpa
Inside the config folder.
- OneCD
- Guru
- Posts: 12163
- Joined: Sun Aug 21, 2016 10:48 am
- Location: "... there, behind that sofa!"
Re: [SCRIPT] Sherpa
Ah, just spotted it in one of your earlier posts. No worries, thinking ahead - that would be backed-up and restored if we grab the whole config directory, so that's great.
Thanks!
Thanks!
-
- New here
- Posts: 2
- Joined: Mon Jul 20, 2009 7:28 pm
Re: [SCRIPT] Sherpa
Added this to the SABnzbd NAS Installation page: https://sabnzbd.org/wiki/installation/install-nas
- ck16
- Starting out
- Posts: 24
- Joined: Sun Jan 11, 2009 8:49 pm
- Location: Melbourne
Re: [SCRIPT] Sherpa
Hi OneCD,OneCD wrote:
Known issues
- A couple of reports of "ImportError: No module named xmlrpclib" when post-processing. Please advise if this happens to you and where you saw this message.
I started experiencing this error about 2 weeks ago when post-processing music, TV Shows or Movies. I did have a movie successfully post-process recently, but in general everything fails with this error.
Is there anything you'd like me to check or logs to post?
Thanks in advance!
Cheers,
ck
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
I know @OneCD changed a few bits and ends according to this GIT Page about a month ago "fix path creation error with nzbToMedia" , after I reported this. This was resolved for me, after his latest update. If you have not done so, I would recommend an update of Sherpa and an re-install of SAB via:ck16 wrote:Hi OneCD,OneCD wrote:
Known issues
- A couple of reports of "ImportError: No module named xmlrpclib" when post-processing. Please advise if this happens to you and where you saw this message.
I started experiencing this error about 2 weeks ago when post-processing music, TV Shows or Movies. I did have a movie successfully post-process recently, but in general everything fails with this error.
Is there anything you'd like me to check or logs to post?
Thanks in advance!
Cheers,
ck
Installation
A little different this time. SSH / PuTTY into your NAS as the 'admin' user,
Change to the Public share directory:
Code: Select all
cd /share/Public
Code: Select all
curl -O https://raw.githubusercontent.com/onecdonly/sherpa/master/sherpa.tar.gz && tar -zxvf sherpa.tar.gz
Code: Select all
./SABnzbdplus
- ck16
- Starting out
- Posts: 24
- Joined: Sun Jan 11, 2009 8:49 pm
- Location: Melbourne
Re: [SCRIPT] Sherpa
Awesome thank you!dirkonline wrote: I know @OneCD changed a few bits and ends according to this GIT Page about a month ago "fix path creation error with nzbToMedia" , after I reported this. This was resolved for me, after his latest update. If you have not done so, I would recommend an update of Sherpa and an re-install of SAB via:
I've just followed your steps and reinstalled SABnzbd. Hopefully this solves my issues.
Cheers,
ck
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
My pleasure, I am keeping my fingers crossedck16 wrote:Awesome thank you!dirkonline wrote: I know @OneCD changed a few bits and ends according to this GIT Page about a month ago "fix path creation error with nzbToMedia" , after I reported this. This was resolved for me, after his latest update. If you have not done so, I would recommend an update of Sherpa and an re-install of SAB via:
I've just followed your steps and reinstalled SABnzbd. Hopefully this solves my issues.
Cheers,
ck
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
Just a heads up: Sickrage git has been taken down :/
Repository unavailable due to DMCA takedown.
Repository unavailable due to DMCA takedown.
-
- Easy as a breeze
- Posts: 420
- Joined: Mon Sep 10, 2007 4:27 pm
Re: [SCRIPT] Sherpa
Fake DMCA takedown, according to reddit. It seems that one of the fork developers couldn't accept that another one was more successful and faked the request.
- ck16
- Starting out
- Posts: 24
- Joined: Sun Jan 11, 2009 8:49 pm
- Location: Melbourne
[SCRIPT] Sherpa
Mate, it worked like a charm! I had a few shows successfully post process in the last 48 hours.dirkonline wrote:
My pleasure, I am keeping my fingers crossed
Thanks for your help!
Cheers,
ck
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
Man I am so glad to hear that. I am also rolling my eyes! Thanks for the updatedrfruit wrote:Fake DMCA takedown, according to reddit. It seems that one of the fork developers couldn't accept that another one was more successful and faked the request.
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
You're most welcome, I am glad it works okay for you now. Just remember, you can update the entire installation of SAB with a restart which will then do a GIT update / pull etcck16 wrote:Mate, it worked like a charm! I had a few shows successfully post process in the last 48 hours.dirkonline wrote:
My pleasure, I am keeping my fingers crossed
Thanks for your help!
Cheers,
ck
Code: Select all
/etc/init.d/sabnzbd.sh restart
- dirkonline
- Easy as a breeze
- Posts: 305
- Joined: Mon Oct 18, 2010 4:08 pm
Re: [SCRIPT] Sherpa
Just saw this:
I reckon we should enjoy this as long as it works. Thank you, OneCD for the work and all the help. Unless someone else steps up with the skills to support this, a simple working version of SAB etc on QNAP is no longer an option.2017-07-15 - I've left this forum. I'm switching to a pure Debian environment for both my NAS. As a result, I'll no longer be able to use or support QNAP's firmware. This means no more QPKGs, closed-source software, "Malware Removers", etc ... so, I'm looking forward to it.
To contact me, send a mail to one.cd.only@gmail.com. I'll still be a contributor on various other software-related forums so I might see you there.
Thank you to all community members who have participated in the many discussions - and to the regulars I saw here everyday (your advice has taught me a lot). I have also learned a great deal by assisting others, and hope many more members will do the same.